Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What is the difference between commercial 700 and 900 cooking systems?

700 and 900 cooking systems usually differ in nominal front-to-back depth, expressed in millimetres. The shallower 700 format leaves more room for other kitchen activities. A 900 format offers a deeper work area. Compare the specific cooking modules within each range, because the series number does not tell you the vessel capacity, energy demand or production rate of an individual appliance.

Compare both depths on one floor plan with the rear edges in the same position. A nominal 900 mm body extends 200 mm farther forward than a 700 mm body. Mark the opposite bench and the route staff use during service to see where that extra depth falls. Use the selected appliance drawing for the full installed outline, including projections and the space required for connections and access.

Match the cooking surface or vessel to the menu before choosing the deeper line. Record the batch size, pan dimensions and busiest service period for each station. Then compare those needs with the offered appliance data. More depth can provide useful working space, but it does not establish a number of meals per hour. Two units in the same depth range can perform different cooking tasks.

Keep the depth comparison separate from electrical and installation choices. Record the offered power configuration beside each appliance code and place its connection points on the drawing. Check the actual dimensions when combining modules in one line. A shared 700 or 900 label alone does not establish that different units have matching work heights or connections.

For chilled preparation beside the cooking line, the linked GN-1130SC is a separate countertop topping fridge with four 1/3 GN pan positions. Its body measures 1130 x 405 x 280 mm. It is a refrigeration reference for the surrounding preparation area, not a 700 or 900 cooking module. Use the inquiry entry to discuss this rail with your counter layout and nearby cooking equipment marked, so its proposed installation can be considered in that setting.

Prepare this information

  • Cooking module codes and nominal depths
  • Full installed outlines and opposite bench position
  • Menu, batch size and appliance capacity
  • Power configurations and any adjacent chilled preparation area

Compare chilled topping rail dimensions and pan positions

Matching model records

Discuss your site and product arrangement

Send your equipment brief