Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Pickup or delivery · Upstairs access

Commercial Kitchen Pickup or Delivery: Stair-Route Survey

Prepare an upstairs equipment delivery inquiry with numbered stair flights, measured landings, headroom photographs, shipment package records and a line-by-line movement scope.

Identify the equipment for the route survey →
JINYU GN-660RT countertop cake display with two raised shelves and a lower deck at a breakfast counter
JINYU GN-660RT · Recorded cabinet outline 660 × 530 × 730 mm

Cabinet references for the stair-route inquiry

Recorded cabinet bodies in W × D × H, mm. Request shipment-specific packed dimensions and gross weights for the movement proposal.
JINYU modelCabinet body (mm)Body footprintInstallation
GN-660RT660 × 530 × 7300.350 m2Countertop
GN-1200RT1200 × 530 × 7300.636 m2Countertop
GN-1200RF21200 × 730 × 12000.876 m2Freestanding
GN-620FS620 × 700 × 20180.434 m2Freestanding

What should a stair-route survey include in a kitchen equipment delivery inquiry?

Describe the entire movement from the receiving entrance to the intended equipment position. Give each flight, landing, doorway and final room a reference on a simple route sketch. Record the floor served and identify where the route changes direction. Photograph those locations in sequence so the transport provider can connect each measurement with the correct part of the building.

Keep the requested endpoint explicit. Delivery to a ground-floor entrance and movement to an upstairs kitchen describe different scopes. Ask the provider to state the endpoint and activities included in its response. Attach the same route survey to a buyer-arranged pickup request: the collection arrangement still needs a plan for destination access. The survey supplies site information for a movement proposal; the provider's method and equipment belong in its response.

Which cabinet dimensions can I use while preparing the survey?

Use recorded cabinet dimensions to identify the equipment under discussion. GN-660RT measures 660 × 530 × 730 mm, while GN-1200RT measures 1200 × 530 × 730 mm. Both are countertop displays. GN-1200RF2 is a freestanding cabinet measuring 1200 × 730 × 1200 mm. GN-620FS is a freestanding beverage cooler measuring 620 × 700 × 2018 mm. Label every dimension as width, depth or height.

These body dimensions help distinguish the equipment lines before the shipment package schedule is available. GN-1200RT and GN-1200RF2 share a 1200 mm width, but RF2 is 200 mm deeper and 470 mm taller. Keep separate route-review rows for the two cabinets. Request actual packed dimensions, gross weights and package identifiers for the proposed movement; cabinet-body dimensions do not establish cargo size or handling weight.

How should I measure a stair flight and the headroom above it?

Give every flight a reference such as S1 or S2. Record the clear width at its narrowest observed point and identify the features defining that width, including handrails, posts or projecting trim. Record the number of steps, measured rise and tread dimensions, and any change along the flight. Take a photograph showing where each measurement was made rather than attaching an unexplained number to a general stair photograph.

Measure and label the overhead restrictions along the route, including beams, ceiling changes and the space below the next flight. Put the measuring points on an elevation sketch. A single floor-to-ceiling measurement at the bottom of the stairs does not describe the overhead space farther up. Send the measurements and photographs together, then request a movement proposal addressing the actual shipment package and the surveyed route.

What makes a landing different from a straight doorway?

A landing connects movements in different directions. Record its clear length and width, the approach from the lower flight and the exit toward the upper flight or room. Mark walls, rails, door leaves and any fixed obstruction. Photograph from both approaches. If a door opens onto the landing, show its opening direction and the area occupied when open.

For an illustrative landing measuring 1500 × 1500 mm, subtracting GN-1200RF2's 1200 mm body width leaves 300 mm along that one axis. That arithmetic does not demonstrate that the packed cabinet can turn or pass between flights. Keep the landing rectangle, flight widths and overhead restrictions on the same sketch. Request the provider's proposed orientation and movement sequence against that geometry, with the cargo dimensions and handling equipment included in the review.

Which package and movement details should the provider return?

Request a package schedule linking each cargo identifier to the complete equipment model and quantity. It should state actual packed dimensions and gross weight, including separately packed accessories. Ask the movement provider to identify the handling equipment, proposed orientation, staging positions and people or services included in its scope. Keep the returned method attached to the survey revision used to prepare it.

Ask for the equipment handling instructions applicable to the offered configuration when the proposal includes unpacking, changing orientation or moving the cabinet beyond the receiving entrance. Record who coordinates those activities and the final placement. A visible wheel in a product photograph does not establish how a package should travel on stairs. Keep the stair movement and the later installation or commissioning activities as individual scope lines in the comparison.

How do I compare two delivery responses for the same upstairs position?

Give both respondents the same model schedule, package schedule revision, route survey and requested endpoint. Use a comparison row for entrance receiving, staging, stair movement, unpacking, room placement and removal of packing materials. Copy the actual response wording alongside each activity. Identify any handover between the carrier and a separate indoor-movement provider, with the contact responsible for arranging it.

If one response ends at the ground-floor entrance, keep that endpoint visible rather than treating it as equivalent to placement upstairs. If another response proposes a different route, label the alternative and survey its restrictions separately. Retain questions and revised responses beside the original scope. This makes a change in movement method or endpoint visible without confusing it with a change in the cabinet itself.

What should I send JINYU after completing the stair survey?

Send the model codes and quantities, destination, receiving entrance reference and requested final room. Attach the numbered route sketch, flight measurements, landing plans, headroom observations and photo key. Include the shipment package schedule when supplied, or identify it as a requested document. Mark the questions that need an equipment response separately from the questions assigned to the movement provider.

For Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司), use the same equipment line identifiers in the inquiry and the route worksheet. If the selected model changes, update the cabinet record and request the corresponding package schedule before reusing a movement response. Keep the final agreed scope and survey revision with the destination receiving documents so the people meeting the shipment can identify the endpoint and route reviewed during purchasing.

Stair-route survey and movement worksheet

Use a location reference and a document revision to connect measurements, photographs and the returned movement proposal.
RecordReferenceDocument connection
EquipmentComplete model code and quantityShipment package identifier and revision
FlightClear width, steps, rise and tread measurementsNumbered photographs and measurement points
HeadroomOverhead restriction and location along routeElevation sketch and photo reference
LandingClear length, width, entry and exit directionsFixed obstacles and door swing
CargoPacked dimensions and gross weightPackage schedule revision
Movement scopeHandling method, staging and endpointProvider response and activity owner
Final positionRoom reference and placement requestReceiving and installation handover
Send the equipment schedule and stair-route survey →