JINYU · Buyer question
How do I check pan lids and handles beneath a topping-rail cover?
List the accessories used with each pan: lid, raised handle, ladle notch or utensil resting position. Measure their highest points from the pan rim and photograph them in the intended working position. Checking only the empty pan body leaves out the parts most likely to occupy the space above it. Keep each accessory paired with its pan reference.
Add these outlines to the side section for the offered GN-1305SC cover and support configuration. Check the closed position and the movement needed to open the rail, lift a pan lid and remove the pan. Ask for the relevant cover geometry; the overall cabinet height alone cannot describe the available space or those movements.
Walk through the sequence with the representative accessories. Record where the removed pan lid rests and whether the utensil must move first. Send the section and sequence photographs through the inquiry entry, identifying the exact accessory combination. Preserve the demonstrated arrangement in the equipment record, including any accessory that needs a separate resting position during service.
Prepare this information
- Accessory heights measured from the rim
- Closed and moving cover positions
- Lid resting position and removal sequence
Review the topping fridge series