Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Why does an ingredient pan rock even when its nominal size matches the topping rail?

Check where the pan actually touches the support. Photograph the empty pan from above and from the side, then measure its outside rim in both directions. Record bent edges, rounded corners and any lip that prevents the rim from resting flat. A matching nominal pan designation does not establish how this particular rim sits on the offered support.

Ask for a drawing showing the opening and the bearing surfaces for GN-1305SC in the proposed configuration. Compare the rim with those surfaces at all four corners. During a sample fit, record which edges rest on the support and where a gap remains. Keep the test on the intended support arrangement; a pan resting on a workbench does not demonstrate its seating in the rail.

Include an underside photograph and a short side-view sequence showing the rocking movement in the inquiry. Identify the pan and support separately so the response can distinguish a damaged sample from a geometry mismatch. Request the matching pan or support option for review rather than adding packing pieces to make an uneven sample appear to fit.

Prepare this information

  • Outside rim and corner measurements
  • Four-corner contact photographs
  • Pan and support identified separately

Review the topping fridge series

Matching model records

Discuss your site and product arrangement

Send your equipment brief