Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What is Gastronorm?

Gastronorm, abbreviated GN, is a system of standard container sizes used in commercial kitchens. Buyers use the GN size to describe a food pan by its outside top dimensions. GN 1/1, often called full size, measures 530 x 325 mm across the outside top. The EN 631-1 standard covers catering-container dimensions. A GN designation helps specify a container for storage, preparation or service, but the pan and the equipment still need to suit the intended task.

Smaller GN formats use related dimensions. GN 1/2 measures 325 x 265 mm, GN 1/3 measures 325 x 176 mm and GN 1/6 measures 176 x 162 mm. These are outside top dimensions, not the usable space inside the container. Use the published measurements when drawing a pan layout. Do not calculate a smaller pan by dividing both sides of the full-size dimensions. For example, a GN 1/2 pan retains the 325 mm side. A proposed combination also needs the correct supports beneath its rims.

Specify pan depth separately from the GN fraction. A GN 1/3 pan described as 100 mm deep has the same nominal top format as a GN 1/3 pan described as 65 mm deep. Their depth and capacity differ. Use the pan drawing and stated volume to estimate ingredient quantities. Plan how much food to load between replenishments. The GN fraction alone gives neither litres nor portions. Record the lid and any raised handle as well, because these occupy space above the supporting rim.

For a countertop ingredient rail, GN-1130SC lists four 1/3 GN positions in a 1130 x 405 x 280 mm body. GN-1305SC lists five 1/3 GN positions in a 1305 x 405 x 280 mm body. Both records describe a hinged lift-up lid. Assign an ingredient to each position, then compare four pans with five for your preparation routine. Those records identify the nominal pan layout and cabinet body. They do not specify the accepted pan depth or confirm that pans are supplied. The equipment model prefix is also distinct from the pan-size designation; use the pan-position specification to identify the format.

Before reusing existing pans, compare their outside rims and below-rim bodies with the offered rail drawing. Confirm the support positions, permitted depth and clearance beneath the equipment lid. If you want to replace one pan with smaller containers, request the matching support-bar arrangement and parts list. Test whether staff can lift a middle pan with the neighbouring containers still seated. A pan that fits a refrigerated rail also needs its own material and operating limits checked before use in an oven or heated holding unit. A shared GN format does not establish temperature suitability or the performance of a loaded appliance.

Use the equipment inquiry below to send your model choice, ingredient list and proposed pan layout. Include each pan format, depth, material, lid and quantity, plus photographs and measurements if you plan to reuse containers. For GN-1130SC or GN-1305SC, ask for the accepted pan-depth specification, layout drawing and list of included pans, lids and support bars. Add the measured counter layout and space available above the rail for its hinged lid. Keep the returned configuration with the pan list so later replacement orders refer to the same arrangement.

Prepare this information

  • GN format and outside top dimensions for each pan
  • Pan depth, stated volume, material and intended food task
  • Rim supports, intermediate bars, lids and removal access
  • Selected rail model, counter drawing and overhead lid space
  • Accepted pan depths and included pans, lids and support bars

Compare the countertop topping fridge models

Matching model records

Discuss your site and product arrangement

Send your equipment brief