JINYU · Buyer question
What should I record before replacing a display cabinet inside existing joinery?
Start with a dated plan of the existing cabinet position. Identify the counter, walls, nearby equipment and fittings that will remain. Give the current cabinet a survey reference and photograph its identification plate. Take each measurement from the same wall reference and fixed height datum. Distinguish direct measurements from values taken from earlier drawings, and keep the drawing reference and revision beside each copied value.
Separate the available opening from the space used during operation. Mark staff access, customer approach, doors, drawers and cleaning access on the plan. Add counter sections showing worktop edges, shelves and concealed projections. Label concealed dimensions as unmeasured and record what would be required to expose each surface. List assumptions separately, with the source document or person and date for each. A proposed fitting removal does not establish the opening available after removal.
List retained fittings and proposed alterations, and record who will carry out each alteration. Send the survey and photographs through the inquiry entry alongside the model references below. Identify the selected survey revision and request a drawing for the exact offered model and configuration. Compare that drawing with the selected survey. Overall width alone does not establish fit inside the retained counter.
When a new measurement replaces an assumption, add the dated reading to the revised survey and link it to the affected location. Retain the earlier survey and its assumptions under their original references. If the cabinet position changes, keep the original measurements and add dated readings at the revised position. Include the selected survey and cabinet drawing references in the handover so later comparisons can be traced to the records used.
Prepare this information
- Dated plan, cabinet reference, wall reference and height datum
- Direct measurements, copied drawing revisions and sourced assumptions
- Retained fittings, unmeasured surfaces and proposed alterations
- Selected survey and exact offered configuration drawing
- Revised readings linked to locations and earlier survey records retained
Compare the open-front display series