Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Planning guide

Display cabinet replacement: survey the existing counter and compare drawings

Replacing a display cabinet inside an existing counter starts with the space that remains. Survey the opening, retained joinery and staff side separately. Identify concealed areas before comparing the proposed equipment with the measured plan.

Use one fixed height datum and the same wall reference to locate the surveyed footprints. At each footprint, record the front-left, front-right, rear-left and rear-right floor readings, the customer side and the sign convention. Keep the joinery sections, service points and staff-access measurements with their marked positions and survey dates. State whether the cabinet front or rear follows the selected alignment line. If the layout moves, retain the original records and add dated measurements at the revised positions. Mark concealed or inaccessible points as unmeasured.

Compare the exact model and configuration offered against the selected revisions of the survey and cabinet drawings. Keep measured levels separate from proposed cabinet base levels, support settings and site alterations. List assumptions separately, with the source document or person and date for each. A proposed fitting removal does not establish the clear opening available after removal. Keep unanswered drawing questions beside the affected locations.

Send a dated handover index through the inquiry entry. For each selected survey view, comparison drawing, and offered installation or handling document, give its reference, revision, and date. Label each comparison with the selected survey and offered drawing revisions. When a new measurement replaces an assumption, link the dated reading to that assumption in the revised comparison. Include the marked location, measured surfaces and survey revision. Keep each earlier handover index with the survey views, readings, assumptions, comparisons and offered documents used for that review. Use the model records below as starting references and request drawings for the exact offered configuration.

Questions to resolve before ordering

Recorded cabinet dimensions

Cabinet body dimensions; installation space and interior fit require a separate review.
ModelWidth × depth × height
GN-900L900 × 740 × 1400 mm
GN-868FM1220 × 690 × 2048 mm

Discuss your site and product arrangement

Send your equipment brief