Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Buyer planning guide

Commercial Kitchen Pickup and Delivery: Cargo Units and Volume Worksheet

Reconcile mm, cm, inches, kg and lb in a kitchen equipment cargo schedule. Compare three example packages, volume totals and the document revision sent to carriers.

JINYU GN-660RT countertop cake display with two raised shelves and a lower deck at a breakfast counter

Worked cargo conversion: three rows, four packages

All package measurements and weights below are illustrative. They are not packed dimensions or weights for JINYU equipment. Source dimensions and gross weights are per package; calculated row totals include quantity.

Rectangular outside volume; mm = millimetres, cm = centimetres, in = inches, kg = kilograms, lb = pounds.
Package rowQuantitySource dimensionsConverted dimensions (mm)Source gross weight eachRow volume (m3)Row gross weight (kg)
P11140 × 70 × 95 cm1400 × 700 × 95080 kg0.93100080.0000
P2140 × 20 × 30 in1016 × 508 × 762220 lb0.39329099.7903
P32600 × 400 × 300 mm600 × 400 × 30010 kg0.14400020.0000
Total4Sum calculated before display rounding1.468290199.7903

Fields to retain with the working copy

Source document and revision; equipment line; package identifier; quantity; original dimensions and units; original gross weight and unit; conversion factors; calculated row totals; provider response reference.

Keep package identifiers unchanged between the source and working copy. When a provider describes grouped handling units, reconcile that grouping before adding transport totals.

How do I compare pickup and delivery options when cargo measurements use different units?

Keep the original figures beside a converted working copy. For each package, record its identifier, quantity, length, width, height, dimension unit, gross weight and weight unit. Convert the dimensions to one common unit before calculating volume, and convert weights separately. Send the same reconciled schedule to the providers whose pickup or delivery scope you are comparing. That gives each response an identifiable cargo basis.

A useful worksheet has three layers: the source document, the calculation and the provider response. For example, retain a packing sheet showing centimetres even when your comparison uses millimetres. Add the source revision and package reference to the converted row. If a response uses a different measurement, ask which package or revision it describes before copying that value into the shared schedule.

Which dimensions belong in a carrier inquiry for commercial kitchen equipment?

Use the actual outside packed dimensions supplied for the shipment. Cabinet dimensions belong in the equipment and installation record. JINYU GN-660RT has a published body outline of 660 × 530 × 730 mm; GN-1200RT measures 1200 × 530 × 730 mm. Those figures help identify the cabinet and its counter position. They do not describe the outside of a crate, pallet or other transport package.

Give separately packed accessories their own identifiers when the shipment schedule lists them separately. If packages are combined into a handling unit, record the resulting outside dimensions and the packages enclosed. Choose the physical units presented to the carrier for the transport total. Keep the package-to-equipment mapping so the destination team can still identify the cabinets after packing is removed.

How do mm, cm and inches convert in a package schedule?

One centimetre equals 10 millimetres, and one inch equals exactly 25.4 millimetres. Apply the factor to every dimension in the row. An illustrative package measuring 140 × 70 × 95 cm becomes 1400 × 700 × 950 mm. A different example measuring 40 × 20 × 30 inches becomes 1016 × 508 × 762 mm. These are hypothetical package measurements, not packed specifications for either JINYU model.

Keep length, width and height in their original order and label the unit on each displayed set. Do not convert only the first figure or combine a length in centimetres with a depth in millimetres. If the source has no unit, return the exact row to the document owner for an identified measurement. A cabinet photograph or a familiar model width cannot establish the unit used on a packing sheet.

How is cubic volume calculated for several packages?

Convert each dimension to metres, then multiply length × width × height × quantity. For the 140 × 70 × 95 cm example, the calculation is 1.4 × 0.7 × 0.95 = 0.931 cubic metres for one package. For the 40 × 20 × 30 inch example, use 1.016 × 0.508 × 0.762, giving approximately 0.393290 cubic metres. Retain the unrounded result in the calculation and round only the displayed total.

The worked schedule below also includes two small packages, each 600 × 400 × 300 mm. Each occupies 0.072 cubic metres by its outside rectangular dimensions; together they contribute 0.144 cubic metres. The three rows represent four packages with a combined rectangular volume of approximately 1.468290 cubic metres. This arithmetic does not describe a vehicle loading arrangement, stacking permission or the transport provider's charging method.

How should gross weight in kg and lb be reconciled?

Convert pounds using 1 lb = 0.45359237 kg. In the example schedule, the second package has an illustrative gross weight of 220 lb, equivalent to about 99.7903 kg. The first package weighs 80 kg, and each of the two small packages weighs 10 kg. The combined example gross weight is therefore approximately 199.7903 kg. Quantity applies to weight as well as volume when a row gives a per-package value.

Keep gross weight separate from cabinet net weight and from rated power or capacity. A figure in watts or litres cannot fill a missing cargo field. Label whether a document reports weight per package or a row total before multiplying. Preserve the source precision in the record; displaying a converted value to four decimal places does not make the original scale measurement more precise.

What errors can change the comparison between two transport responses?

A quantity copied twice can inflate both volume and weight. A grouped pallet counted alongside all its enclosed packages can do the same. Compare the identifiers in the calculation with the physical handling units named in the provider response. In this example, rows P1 and P2 each have quantity one, while P3 has quantity two. The total is four packages even though the worksheet has three rows.

A revision can also change one dimension without changing the model code. Retain the previous measurement and identify the replacement document. Recalculate affected row totals and the combined total, then ask each provider to reference the revised schedule. Keep the transport scope alongside those calculations: collection, unloading and the final handover point still need their own descriptions. Equal cargo totals do not establish equal pickup or delivery services.

What should I send JINYU with a reconciled cargo worksheet?

Send the full equipment model codes and quantities, the source package schedule, its revision and your converted working copy. Identify the collection location or destination and the physical handover point being requested. Include the provider's response when a question concerns a different unit, package count or revision. Name the row and field needing an answer so the response can be attached to the same record.

Address the equipment inquiry to JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). The return record should keep the source measurements, conversion factors, package identifiers and updated totals together. After choosing a transport arrangement, pass the accepted package schedule to the receiving contact with the movement reference. That lets the destination team compare arriving labels with the same cargo list used during the pickup or delivery review.

Reference sources

Regional references support general planning; model-specific specifications come from the published JINYU model tables.