Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Equipment and cargo records

Commercial Kitchen Pickup or Delivery: Equipment-to-Package Schedule

Prepare a pickup or delivery package schedule for kitchen equipment: map order lines to package identifiers, separate cabinet and packed dimensions, and reconcile split shipments.

Read the worked package allocation →
JINYU GN-660RT countertop cake display with two raised shelves and a lower deck at a breakfast counter
JINYU GN-660RT cabinet photograph. Packaging and shipment quantities are documented separately.

Identify the cabinet before requesting packed cargo data

Published cabinet dimensions, not packed shipping dimensions or gross weights.
JINYU modelCabinet W × D × H (mm)Listed capacity
GN-660RT660 × 530 × 730102 L
GN-1200RT1200 × 530 × 730190 L
GN-1200RF21200 × 730 × 1200425 L

Worked equipment-to-package allocation

Illustrative buyer records only. These lines do not specify how any JINYU model is packed.

Equipment lineEquipment unitsPackage identifiersPackage countMovementIllustrative contents
E12P01, P022ATwo equipment units
E21P031AOne equipment unit
E31P04, P052BOne equipment unit; separate accessory package
Total4P01-P055Two movementsFour equipment units; five packages

Fields to request for each actual package

  • Package identifier, equipment order line, model and assigned contents.
  • Packed length, width and height with measurement units; packed gross weight with weight units.
  • Movement reference, collection point, destination and proposed handover endpoint.
  • Packing document revision; handling instructions; any grouped transport handling-unit reference.
  • Record package identities and partial collection handovers

Movement A: 3 equipment units, 3 packages. Movement B: 1 equipment unit, 2 packages. Request shipment-specific cargo figures before seeking a transport assessment.

What package information do I need to compare pickup or delivery options?

Start with the equipment schedule, then request a shipment package schedule that maps the selected equipment to the cargo a transport provider would handle. Each record needs an order-line reference, model, equipment quantity, package identifier, packed dimensions and gross weight. Keep the proposed collection point and destination beside that schedule. A provider can then assess a defined movement rather than infer cargo from a product photograph.

The comparison has two separate inputs: what is being moved and where the agreed service begins and ends. This guide addresses the first. Use the linked transport-options guide for handover scope and the access worksheet for site measurements. Package information supports a specific pickup or delivery inquiry; it does not establish that a particular transport service is included with equipment.

Can I send the cabinet dimensions from the product page to a carrier?

Send them as equipment identification, with their meaning stated. The table below lists the outside cabinet dimensions of three JINYU models. GN-660RT measures 660 × 530 × 730 mm; GN-1200RT measures 1200 × 530 × 730 mm. GN-1200RF2 is also 1200 mm wide, but measures 730 mm deep and 1200 mm high. The two 1200 mm cabinets therefore describe different physical outlines.

These are cabinet measurements, not packed cargo measurements. Request the shipment-specific packing dimensions, gross weights and handling instructions against the selected configuration. Keep the supplier document reference with each value. Do not calculate a transport booking from cabinet volume or add an assumed packaging allowance. A transport provider needs the actual proposed package arrangement, including any separate accessory packages.

How do I connect equipment quantities with package counts?

Use two linked tables. The equipment table records the model and quantity ordered. The package table records each physical package and the equipment or accessories assigned to it. A package identifier supplies the connection between them. Equipment quantity and package count can differ, so retain both totals and label them explicitly.

The worked schedule below contains four illustrative equipment units and five illustrative packages. Line E1 has two units assigned to packages P01 and P02. Line E2 has one unit in P03. Line E3 has one unit in P04 and a separate accessory package P05. This is a bookkeeping example, not the packing arrangement for a JINYU model. Request the actual package allocation before replacing these examples with shipment records.

How should I record a shipment that is collected or delivered in two parts?

Assign a movement reference to each package and total the packages by movement. In the example, movement A contains P01, P02 and P03: three packages associated with three equipment units. Movement B contains P04 and P05: two packages associated with one equipment unit. The equipment total remains four, even though the package total is five. An accessory package does not create another cabinet.

Give each movement its own collection and destination details, provider reference and schedule revision. When a package moves between planned movements, update its assignment rather than copying the package into both lists. Carry the same identifier into the appointment and receiving records. This makes a partial arrival traceable to the intended split rather than treating the unarrived packages as an unexplained count difference.

What should the dimensional record say when packages are grouped?

Record the individual package identifiers and the proposed transport handling units separately. If a provider proposes grouping packages, request a handling-unit reference, the package identifiers included, the resulting outside dimensions and the gross weight of that handling unit. Keep the original package records so the receiving team can still identify the equipment after the grouping is removed.

Avoid counting both a grouped handling unit and its enclosed packages as independent cargo in the same total. Label the totals as equipment units, packages and transport handling units. Ask the provider to describe the arrangement used for its proposal, then retain that version with the transport scope. No stacking, orientation or lifting capability follows from cabinet dimensions; the proposed packing and handling documents supply those details.

How do I check the schedule before asking for a transport proposal?

Read the allocation in both directions. Every equipment order line should point to its assigned packages, and every package should point back to an equipment line or a named accessory group. Count unique package identifiers for each movement. Check that dimensions use one stated unit and that gross weights are identified as packed values. Attach the document revision from which the cargo figures were taken.

Then compare destination labels, movement references and handover points with the inquiry. An address change or revised package allocation can affect which record the provider is reviewing. Keep an earlier version for reference, but identify one current schedule in the inquiry. Use the receiving checklist at handover to record the observed package identifiers and condition against this same allocation.

What should I send JINYU with the package-schedule request?

Send the selected model codes, quantities, intended destination and proposed pickup or delivery endpoint to Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). Identify any planned split by destination or movement. Attach the equipment schedule and ask for the corresponding package allocation, packed dimensions, gross weights and handling documents for that configuration. Include your receiving contact and site access information in the wider transport brief.

Keep the returned cargo schedule with the transport proposal, appointment acknowledgement and receiving record. If the equipment configuration changes, request the matching cargo revision before asking the provider to assess the new arrangement. The product links below identify cabinet specifications; the transport-options, appointment and receiving guides connect the package record to the next purchasing steps.