Can two non-woven bags have the same size but different construction?
Yes. The JINYU catalogue gives JY-ST-01 takeaway shoppers and JY-ST-04 flat-top foil-lined bags the same three size references: S at 21 × 24 × 12 cm, M at 23 × 25 × 14 cm and L at 25 × 26 × 18 cm. These dimensions are outside width × body height × depth. Their matching numbers do not identify the material construction.
JY-ST-01 is a PP non-woven bag with an open top, separate loop handles and a gusseted base. JY-ST-04 has a PP non-woven outer with foil lining and a straight open rim. Use the product SKU and variant together when comparing the two formats or requesting available stock.
What does the S, M or L code identify in this chart?
A letter identifies a variant inside a particular product family. For these two families the corresponding dimensions happen to match, but that is a property of these six catalogue rows. Keep the complete reference, such as JY-ST-01-M or JY-ST-04-M, in the request. A message containing only M and a photograph leaves the construction unresolved.
For an inquiry covering both, write separate lines with the same 23 × 25 × 14 cm dimensions and different product references. Add the requested colour, quantity and intended contents on each line. Ask the response to retain those references when describing the offered bags, so the material and size can be compared together.
Does flat-top mean that JY-ST-04 is a flat bag with no depth?
Here flat-top names the top format of a foil-lined family. Each JY-ST-04 variant has a listed depth: 12 cm for S, 14 cm for M and 18 cm for L. The recorded closure description is a straight open rim with loop handles and no adhesive closing strip. Include that description with the size when identifying the bag.
By comparison, the JY-PL-01 FLAT tote has no listed gusset depth. It is a separate product construction, even though both names contain flat. Read the depth field and product description together. The chart preserves the catalogue naming while showing the relevant construction beside every coded reference.
How do the three 38 × 42 cm references differ?
JY-PL-01 STD and JY-PL-01 FLAT share a listed 38 cm width and 42 cm body height. STD adds a 10 cm gusset depth; FLAT has no listed gusset depth. The JY-PL-02 TALL shopper also has a 38 × 42 cm front outline, with 15 cm depth and a side-and-base-gusset construction.
The difference between the two listed gusset depths is 5 cm. That numerical difference describes their outside body references. It does not establish usable opening dimensions or how a box will pass between the handles. Keep the requested product family, variant and all available dimensions on the same line when discussing these visually similar outlines.
Can I substitute a foil-lined bag for a plain takeaway bag using the same dimensions?
Matching dimensions give a useful comparison point, but the offered construction still needs to match the intended contents and presentation. Record whether the request is for JY-ST-01 or JY-ST-04, then ask any proposed alternative to identify its outer material, lining, opening and handles. Keep the original and offered references beside one another in the reply.
The foil-lined catalogue description does not state a temperature-retention duration. If the application depends on thermal performance, describe the packed contents and request evidence for the exact offered construction and conditions. Neither a common outside size nor the presence of foil supplies a measured performance result for a particular meal or journey.
How should I measure the contents before choosing among matching sizes?
Measure the complete packed contents in their intended carrying orientation, including lids, sleeves and projecting corners. Keep these item dimensions separate from the bag dimensions. For several items carried together, record the grouped outline and identify whether the arrangement is stacked or side by side. Use the same units throughout the request.
Send those measurements with the exact catalogue references being compared. Ask for the offered bag opening and usable base information, then review a filled sample for insertion, closure arrangement and handle position. A flat body, a gusseted shopper and a foil-lined bag may interact differently with the same rigid pack even when one or more outside measurements match.
What belongs on a comparison request for these bag formats?
Give each line a product SKU, variant, outside dimensions and named construction. Add colour, requested quantity, contents, any artwork reference and destination. Separate a preferred specification from an acceptable alternative, so a reply can identify which one it addresses. Small-quantity non-woven requests start with available stock; catalogue references do not describe the current stock position.
The worked request below compares two M variants with identical dimensions and different material descriptions. It also distinguishes two plain 38 × 42 cm bags by their depth and product family. Its labels are illustrative request identifiers. Replace them with your project references and record the returned product identity against each one.
How do I carry the selected size into the final inquiry?
Retain the complete coded reference from the chart, including the variant suffix, and repeat the dimensions with their order and unit. Attach the construction description you selected and the packed-item measurements. Include any proposed alternative as a separate line rather than replacing the original entry while the comparison is underway.
Address the inquiry to JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). Ask the reply to identify the offered stock size, material construction, colour and packing arrangement against your line references. For a custom canvas tote, backpack or travel bag, use a separate custom brief; these non-woven catalogue dimensions do not define those custom products.
