Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Buyer planning guide

Custom Bag Inquiry: A Quotation Comparison Template

Compare custom bag inquiry replies line by line using a specification matrix, a worked flat-versus-gusseted example and separate records for artwork, packing and delivery scope.

Plain canvas tote with fabric handles for a custom bag specification review

Worked inquiry comparison matrix

Hypothetical buyer request and response. The STD and FLAT sizes are real catalogue references; decoration, revisions and transport entries illustrate differences to resolve.

Keep requested and offered details in separate columns
FieldRequestedResponseFollow-up question
ReferenceLoop tote STDLoop tote FLATWhich catalogue variant is offered?
Body size (cm)38 × 42 × 1038 × 42, flatIs the 10 cm gusset included?
DecorationFront and backFront onlyDoes the response cover both sides?
ArtworkBuyer revision BBuyer revision ACan the response use revision B?
Transport scopeNamed destinationCollectionWhich handover point is covered?

Copy these column headings for each version. Add material, handles, closure, quantity split and packing rows from your brief. View the loop tote references.

Download a blank editable inquiry brief to record the requested bag specification before comparing responses.

How can I compare replies to a custom bag inquiry?

Compare the proposed bag specification before comparing commercial terms. Give every requested version a row, then put the requested detail and each offered detail in separate columns. A reply saying "tote bag with logo" does not establish the body size, fabric, gusset, handles or decoration included. Use the matrix on this page to identify the exact difference and write one question against it.

This template is for the stage after your first inquiry checklist: turning several replies into one purchasing record. Keep the drawing reference and revision at the top of the sheet. Each response should identify that revision. If a reply refers to an earlier drawing, record its actual basis before treating it as an offer for the current design.

What goes in each row of the comparison template?

Use one row for each detail that could change the bag or the scope of the offer. Start with route, version reference, material description, body dimensions and construction. Continue with handle arrangement, closure, pockets, artwork sides, decoration size and colour references. Record requested quantity by version, packing arrangement and destination separately. A single combined description makes a substitution harder to spot.

For each row, write the requested value, the offered value, the supporting document and the question still open. Use the supplier's stated material description rather than converting it into a different fabric grade. If a material weight is supplied, retain its unit and document reference. A product photograph can support the discussion, but cannot supply an unrecorded fabric weight or handle dimension.

How does a real flat-versus-gusseted reference expose a mismatch?

The JINYU Loop-Handle Non-Woven Tote has a FLAT reference at 38 × 42 cm and a STD reference at 38 × 42 × 10 cm. In both cases the first two figures are body width and height. The STD reference adds a ten-centimetre depth; the FLAT reference has no gusset. These catalogue entries provide a concrete way to see why matching only width and height misses a construction difference.

Imagine a buyer requests the STD stock reference, but a response describes FLAT at the same width and height. Enter that as a construction difference and ask which reference the response covers. Do not silently replace STD with FLAT in the worksheet. This is a hypothetical inquiry comparison using real catalogue dimensions, not a statement of current stock availability or an offered custom configuration.

How should a canvas tote, backpack or travel bag response be recorded?

For a custom canvas tote, record the proposed body construction and the handles against the drawing. For a backpack, identify the shoulder-strap layout, opening and compartments. For a travel bag, separate the main opening, carry handles and any requested shoulder strap. These details describe different construction jobs even when the same artwork is used. Keep the proposed material and lining description attached to the relevant bag version.

Small-quantity non-woven requests follow the stock route; canvas totes, backpacks and travel bags use a custom brief. Do not carry a stock tote's catalogue dimensions into a custom bag row unless they are explicitly your requested design dimensions. Mark them as a buyer request, then record the offered dimensions separately so a reference size is never mistaken for a returned specification.

How do I compare decoration without losing an artwork revision?

Give each artwork file an identifier, a revision and a placement drawing. Compare the stated decoration method, printed sides, dimensions and colour references against those files. For example, a reply covering one printed side differs from a brief requesting front and back decoration. Record the difference in the artwork row rather than assuming the second side is included because the front image looks correct.

Keep artwork approval and bag construction review as separate records. A placement proof can show the logo position while leaving handle attachment or pocket construction unresolved. Ask the response to state which file it uses. When a logo changes, replace the reference in every affected version row, then request an updated reply tied to the new revision.

Which packing and delivery details belong beside the bag specification?

Record how the bags are proposed to be packed and which packing information the response includes. Keep individual packing, carton arrangement and any supplied carton dimensions or weights in separate fields. Ask for the basis of a packed-cargo estimate when the bag design is still changing. A packing figure for one tote construction should stay attached to that construction's version and quantity.

Put the destination and transport scope beside the packing record. Identify whether the response covers collection, transport to a named point or another stated handover arrangement. List unloading and final receiving separately when those services matter to your project. This makes two responses with different transport scopes visible without treating either as a complete delivered offer by assumption.

How do I resolve differences before requesting a sample?

Turn each difference into a specific question: "Does this reply cover the STD 38 × 42 × 10 cm gusseted reference?" is more useful than "Is this the same bag?" Attach the relevant drawing or catalogue link, and identify the response being questioned. Keep the requested value in place until the buyer selects an alternative; a supplier suggestion does not automatically revise the brief.

Once the specification is aligned, use it to prepare the sample review. Compare the sample's opening, contents arrangement, handles, closure and decoration against the agreed version record. Photograph the reviewed features and keep those images with the sample reference. Record any changed detail in a new revision so the reviewed sample and the purchasing specification describe the same bag.

What should I send JINYU for a revised response?

Send the comparison sheet with the affected version references, current drawing and artwork files, requested quantity split and destination. Include the precise differences you want addressed and name the response being revised. If you have selected an alternative, state which requested detail it replaces. Retain unchanged fields so the next reply can address the whole current specification rather than a disconnected correction.

Keep the returned specification, artwork proof, sample notes and packing record together. A completed comparison should let another buyer identify what was requested, what was offered and which changes were accepted without having to reconstruct the decision from a string of short messages.

Reference sources

Regional references support general planning; model-specific specifications come from the published JINYU model tables.