How do I use a non-woven bags size chart for an order containing several kits?
Give each kit a reference and list every bag used in that kit. A kit can contain two different bag sizes, or two bags of one size plus a separate outer shopper. Keep the kit count and bag count in different columns. Multiplying the number of kits by the bags used in each kit produces the quantity for each catalogue reference.
The worked example below has 155 kits across three arrangements. It uses 355 bags, because kit B consumes three bags while kits A and C consume two each. These are illustrative buyer quantities, not stock packs or ordering conditions. Start with the six real JINYU size references in the chart, then attach the chosen references to the kit schedule.
Which dimensions and size codes belong on each kit line?
Record the full product SKU and variant beside width × body height × depth in centimetres. JY-ST-01-M is the takeaway shopper at 23 × 25 × 14 cm. JY-PL-02-RETAIL35 is the gusseted shopper at 35 × 40 × 10 cm. Their roles in the example are separate packing components; the schedule does not imply that a loaded takeaway bag fits inside the shopper.
JY-ST-01-S and JY-ST-01-L measure 21 × 24 × 12 cm and 25 × 26 × 18 cm. JY-PL-02-STD measures 40 × 35 × 15 cm, while TALL measures 38 × 42 × 15 cm. Keep unselected alternatives outside the quantity totals. A size-chart reference becomes an order line only when its use and quantity are specified.
How are the 355 bags in the worked example calculated?
Kit A uses one JY-ST-01-M and one JY-PL-02-RETAIL35. For 80 kits, that is 80 bags of each reference. Kit B uses two JY-ST-01-M and one JY-PL-02-RETAIL35. For 45 kits, that is 90 M takeaway bags and 45 RETAIL35 shoppers. The shared references must be added across the two kits.
Kit C uses one JY-ST-01-L and one JY-PL-02-STD. Its 30 kits therefore require 30 bags of each reference. The consolidated request becomes 170 M takeaway bags, 125 RETAIL35 shoppers, 30 L takeaway bags and 30 STD shoppers. The sum is 355. Retain both the kit schedule and consolidated bag totals so a respondent can trace each total back to the intended packing arrangement.
What should I measure before assigning a size to a kit?
Prepare the actual contents of each bag component in its intended presentation. Measure the combined packed width, height and depth, including wrapping, box lids and projecting handles. Identify whether two items are carried together, stacked or packed in separate bags. Outside catalogue body dimensions provide a shortlist; the opening, base construction and loaded arrangement need their own sample observations.
Record the contents reference alongside the bag reference. If kit B has two takeaway bags, label their contents separately so the packer knows whether both receive the same items. Request the offered stock sample or construction details for that arrangement. Keep any requested carrying-performance evidence attached to the same contents and bag construction; the dimension chart supplies no load rating.
How should I handle a different stock size offered for one kit?
Retain the requested size and add the offered reference beside it. If an illustrative response proposes TALL in place of STD for kit C, the body changes from 40 × 35 × 15 cm to 38 × 42 × 15 cm: 2 cm less width, 7 cm more body height and unchanged listed depth. That comparison explains the dimensional change without establishing an equivalent packing result.
Identify which kit lines the proposal affects and review those contents with the offered construction. For small non-woven quantities, ask about available stock sizes and colours. The catalogue chart does not establish current availability. If the alternative is selected, update the kit component and consolidated total together, preserving the original request and the response reference in the change record.
What changes if the number of kits increases after the first inquiry?
Recalculate the affected bag references from the revised kit count. If kit B increases from 45 to 60 while A and C stay unchanged, the additional 15 kits consume 30 M takeaway bags and 15 RETAIL35 shoppers. The revised totals are 200 M, 140 RETAIL35, 30 L and 30 STD: 400 bags for 170 kits.
Send the revised kit schedule and bag totals with a new revision reference. State which earlier schedule it replaces and request a response against the new quantities. Keep any separately requested spare bags on named lines rather than hiding them inside per-kit consumption. This preserves the difference between bags allocated to complete kits and bags requested for another purpose.
What should I send JINYU for a mixed-size non-woven bag inquiry?
Send Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司) the kit schedule, consolidated bag totals, full catalogue references and dimension convention. Add the requested colour and whether each bag is plain or has artwork. Identify the artwork file and printed face for each affected reference. Ask the response to repeat the offered bag construction, stock combination and quantity against each line.
Describe whether you want loose bags grouped by reference or a proposed kit-assembly service. Ask the respondent to state the packing activities it offers and how the resulting packs would be identified. A purchasing schedule describes your requested arrangement; it does not establish an assembly or delivery service. Retain the returned stock and packing response with the selected size record and the same kit revision.
