Buyer planning guide
Non-Woven Bag Size Chart: Compare Quotation Sizes and Substitutions
Compare real JINYU takeaway, self-seal and gusseted shopper sizes. Normalise quotation units, separate style codes and record proposed stock substitutions.

Eight catalogue references for a quotation comparison
| Style | Variant | Width (cm) | Body height (cm) | Depth (cm) |
|---|---|---|---|---|
| Non-Woven Takeaway Bag | S | 21 | 24 | 12 |
| Non-Woven Takeaway Bag | M | 23 | 25 | 14 |
| Non-Woven Takeaway Bag | L | 25 | 26 | 18 |
| Self-Seal Foil-Lined Bag | S | 21 | 26 | 11 |
| Self-Seal Foil-Lined Bag | M | 24 | 24 | 15 |
| Self-Seal Foil-Lined Bag | L | 26 | 26 | 17 |
| Gusseted Non-Woven Shopper | RETAIL35 | 35 | 40 | 10 |
| Gusseted Non-Woven Shopper | STD | 40 | 35 | 15 |
Copy these fields into the quotation sheet
- Requested row
- Buyer reference, style, variant, width × height × depth, units and quantity by colour.
- Original response
- Offered code, unchanged dimension wording, stated units and response revision.
- Normalised body
- Width, body height and gusset depth in cm, with a separate difference for each axis.
- Construction
- Material, lining, closure, handle arrangement and the measurement endpoints shown on the returned drawing.
- Selection record
- Selected alternative, drawing revision, artwork reference and the date of the selection.
The chart identifies catalogue references. Ask about available stock for a small non-woven quantity and retain the offered specification with the response.
How do I compare non-woven bag size charts in two quotations?
Start with one comparison row for each requested style and size. Give the row a buyer reference, then copy each respondent's product code, variant, dimension order and units into separate columns. Retain the original wording beside the normalised measurements. A quotation that says 35 × 40 × 10 does not identify the same body as 40 × 35 × 10 when both use width × height × depth. Ask for the endpoints on a drawing whenever the order is unstated.
Use the JINYU references below to practise that comparison. They are catalogue body dimensions, rather than measured internal clearances. The takeaway S reference is 21 × 24 × 12 cm; the self-seal S reference is 21 × 26 × 11 cm. Their shared S label leaves a 2 cm height difference and a 1 cm depth difference. Carry both the style and variant into every response column.
Can I match S, M and L labels across different bag styles?
Treat a size label as part of its own product reference. JINYU takeaway M is 23 × 25 × 14 cm, while self-seal M is 24 × 24 × 15 cm. Moving from the first reference to the second changes width by +1 cm, height by -1 cm and depth by +1 cm. Write those three differences explicitly in the quotation sheet. A single entry such as M equivalent hides the changed proportions.
The gusseted shopper uses another code set: RETAIL35 is 35 × 40 × 10 cm and STD is 40 × 35 × 15 cm. Record the code with the full style name. When a response supplies a different code, preserve the requested reference and place the offered alternative beside it. This makes the purchasing decision traceable when the order is later discussed with another member of the team.
How should centimetres, millimetres and reversed dimension orders be recorded?
Choose width × body height × gusset depth in centimetres as the comparison columns, while keeping the supplier's original line intact. A hypothetical response stating H400 × W350 × D100 mm normalises to W35 × H40 × D10 cm. That matches the numerical body reference of JINYU gusseted shopper RETAIL35. It does not establish an identical material, handle assembly or bag opening. Copy those features into their own fields.
Convert each measurement before calculating differences. Ten millimetres equal one centimetre; 400 mm therefore becomes 40 cm. A different hypothetical line, W400 × H350 × D100 mm, normalises to 40 × 35 × 10 cm and changes both front proportions. Label the worked responses as examples. Use the actual drawing and units returned for the offered bag when completing a purchasing comparison.
Which construction details need separate quotation columns?
Give closure, handle construction, gusset arrangement and material description their own entries. The takeaway reference has an open top and separate loop handles. The self-seal reference has an adhesive flap and separate loop handles, with a PP non-woven outer and foil lining. The gusseted shopper reference describes an open top, side and base gussets and separate loop handles. These distinctions remain relevant even if two normalised body sizes happen to match.
Ask for a drawing identifying body-height endpoints and any flap extension. Record whether the returned measurement includes handles or excludes them. Add the offered fabric specification and lining description against the exact reference. Keep artwork dimensions in a separate field linked to the proposed body drawing. A larger outside front panel does not establish a printable rectangle or permission to move artwork across seams and handle attachments.
What should happen when a quotation proposes a nearby stock size?
Keep the original requested row and add the proposed stock reference as an alternative. Record requested and offered dimensions, construction changes, colour and the response date. For example, comparing takeaway L at 25 × 26 × 18 cm with self-seal L at 26 × 26 × 17 cm gives +1 cm width, unchanged body height and -1 cm depth. It also changes the closure and lining description. Those are separate decisions for the buyer.
For small non-woven quantities, ask which stock references are available for the requested combination. A catalogue size identifies a reference; availability comes from the response. Attach any sample or drawing review to the offered alternative before recording a selection. Leave the unselected proposal in the comparison history so later correspondence can distinguish an accepted change from an earlier suggestion.
How do I keep a quotation comparison connected to the selected bag?
Use a dated comparison sheet and give the selected row a stable buyer reference. Retain the requested specification, offered code, returned drawing revision and the selection record together. Include quantity by size and colour in the inquiry so the response relates to that assortment. Where artwork is involved, identify its file revision and the placement drawing associated with the selected bag body.
Send the sheet to Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司) through the inquiry page. Ask the reply to repeat the selected style, variant and dimension convention. If a later response changes one dimension, update the offered column and record the new revision rather than overwriting the original request. The resulting record lets purchasing, artwork preparation and receiving refer to the same selected bag without relying on a short size label.
Reference sources
- Browse the complete non-woven size chart
- Measure an existing sample
- Keep style codes attached to order lines
- Send the size comparison
- Print six front and base outlines at 1:5 scale
Regional references support general planning; model-specific specifications come from the published JINYU model tables.