Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I compare a replacement cabinet drawing with a fixed countertop?

Draw a plan and sections through the retained countertop and the proposed cabinet position. Mark one fixed height datum and the wall reference used to locate the cabinet. Record the countertop underside levels against that datum and measure the worktop thickness at each section. Dimension the front overhang, rear return, supports, brackets and internal shelves from named reference lines. Label each section on the plan and include the survey date and revision. Distinguish direct measurements from dimensions copied from earlier drawings. Put the source drawing reference and revision beside each copied value. Sections at different points along the opening show where the available space changes.

Record floor levels at the proposed footprint against the same height datum. Draw the exact outline of the offered cabinet on the sections, using its stated reference points and proposed body-bottom level. Identify the model code, offered configuration and selected survey and cabinet drawing revisions on the comparison. Keep measured floor and countertop underside levels separate from proposed support settings. At each section, compare the cabinet top level with the measured underside level. An overall cabinet height alone does not show the gap beneath a fixed worktop when the floor or underside varies along the opening.

If a revised layout moves the footprint, retain the original sections, photographs and measurements with their position labels, survey dates and drawing revisions. Mark the revised footprint against the same wall reference and state whether its front or rear follows the selected alignment line. Add dated floor readings at the revised corners and countertop underside readings at the revised sections. Record the supports and projections at those positions. Keep concealed points labelled as unmeasured. List assumptions separately, with the source document or person and date for each. A section at the original position does not establish the space at the revised position.

Ask for the locations of air openings, service access panels, doors and other moving parts on the drawing for the offered configuration. Compare those locations with the retained worktop and its supports at the selected footprint. Keep cabinet body dimensions separate from access and installation requirements stated in the offered documents. Mark intersections, missing views and unresolved gaps beside the affected section, with the model code, configuration and cabinet drawing revision.

Send the marked plan and sections through the inquiry entry with photographs of the worktop underside. Identify the selected survey and cabinet drawing revisions used for the comparison. When a new measurement replaces an assumption, link the dated reading and section reference to that assumption in the revised comparison. Retain the assumption in the earlier comparison with its original survey and cabinet drawing references. List any proposed alteration to the countertop or its supports as site work, separately from the measured existing joinery. This keeps a proposed alteration from appearing as space already available for the replacement cabinet.

Prepare this information

  • Fixed height datum, wall reference, dated sections and source revisions for copied dimensions
  • Measured floor and underside levels separated from proposed cabinet levels, support settings and sourced assumptions
  • Original records retained alongside dated readings at revised footprints and sections
  • Selected survey and exact offered drawing revisions, access requirements and marked conflicts
  • Dated replacement readings and section references linked to earlier assumptions

Compare the open-front display series

Matching model records

Discuss your site and product arrangement

Send your equipment brief