Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I document staff access behind a replacement display cabinet?

Draw the staff side of the selected cabinet footprint with adjacent counters, shelving and equipment. Locate the footprint relative to the survey wall reference, and state whether its front or rear follows the alignment line. Label the plan with the survey date and revision. Mark the serving and replenishment positions, storage access and the path used by someone passing behind the operator.

Record aisle widths at named points beside handles, corners and other projections. Identify the two surfaces used for each measurement. Keep measured existing widths separate from clearances calculated between the proposed cabinet outline and the opposing fixture. For each copied dimension, give the source drawing reference and revision. If a revised layout moves the footprint, retain the original plan, photographs and readings. Add dated measurements at the revised positions relative to the same wall reference. An aisle reading at the old position does not establish the width at the new one.

Show the opening direction and full movement envelope of nearby doors and drawers. Request moving-part drawings for the exact offered cabinet configuration, including service panels accessed from the staff side. Label each outline with its cabinet drawing reference and revision. At each marked position, distinguish the measured remaining aisle with an existing door or drawer open from the clearance calculated using a proposed moving-part drawing. Show overlaps when doors open together or a passing route crosses a work position. Keep measured widths separate from access requirements stated in the offered documents or determined by the site designer, and name the source of each requirement.

Photograph the staff view at the selected footprint and label the retained fixtures and measurement points. Mark proposed fixture removal or relocation separately from the existing arrangement. List assumptions about the resulting aisle or door movement separately, with the source document or person and date for each. Link each assumption to its fixture and measurement point. Walk through serving, replenishment and passing tasks on the marked layout. Record where a task encounters an obstruction, which drawing shows it and which movements remain unrepresented because drawing details are missing. Label concealed or inaccessible measurement points as unmeasured.

When later measurements replace an assumption, link the dated readings and their locations to that assumption in the revised comparison. For a removed or relocated fixture, record the remaining projections and the surfaces used for the new aisle measurement. Keep the original readings, photographs and assumptions with their original survey and drawing references. If the measurement location changes, show the new point on the revised plan and retain the earlier point and reading.

Send the marked plan and photographs through the inquiry entry with the model reference, exact offered configuration and selected survey and cabinet drawing revisions. Identify the selected footprint and the moving-part drawing revision used for each door or panel comparison. Keep earlier comparisons with the survey and offered drawing references used for each review. The recipient can then trace an aisle or door conflict to its measured position, drawing or recorded assumption.

Prepare this information

  • Selected footprint, wall reference, dated survey and exact offered drawing revisions
  • Named aisle measurement surfaces and measured or calculated widths with doors open
  • Sourced access requirements and separately dated assumptions linked to fixtures and measurement points
  • Later readings linked to replaced assumptions, with earlier survey views and comparisons retained
  • Moving-part drawing references, task conflicts and unmeasured points

Compare the open-front display series

Matching model records

Discuss your site and product arrangement

Send your equipment brief