JINYU · Buyer question
How do I measure wall projections and skirting behind a beverage cooler row?
Mark the proposed cabinet positions on a plan. Choose a straight survey reference line along the row and locate each wall feature from that line. Record where a skirting section, column or pipe enclosure starts and ends along the row, how far it projects from the wall, and its height above the finished floor. Put matching feature labels on the plan and photographs. Measure low features at their own height; a wall measurement above the skirting misses its projection.
Draw each cabinet footprint against this wall profile. JY-LC-318 is 555 x 550 x 1900 mm, JY-FS-1D is 620 x 600 x 2010 mm and JY-FS-2D is 1100 x 600 x 2010 mm, in width x depth x height order. Use the linked mixed-size drawing question to choose front or back alignment. Mark each rear body edge in relation to the wall features behind that cabinet.
For an illustrative plan, take the wall face as zero and measure toward the aisle. If the aligned body fronts are 700 mm from that face, the JY-LC-318 rear edge is at 700 - 550 = 150 mm. The JY-FS-1D rear edge is at 700 - 600 = 100 mm. If skirting projects 30 mm from the wall behind both cabinets, the plan distances from the skirting face to those rear edges are 120 mm and 70 mm. These example distances describe geometry, not specified ventilation or service clearances.
Add a section through each feature behind a cabinet, showing its height and projection next to the body outline. The body dimensions alone do not locate rear recesses, feet or connections. Request those details and the installation spaces for the offered version. Compare the returned drawing with the plan and sections, then show any revised cabinet front position and its effect on the aisle. Send the survey and labelled photographs through the inquiry with the affected cabinet positions and model codes.
Prepare this information
- Wall features have measured start and end positions, projections and heights
- Plan distances use the same wall reference and identify the affected cabinet
- Sections compare low features with the offered rear and base details
Draw a row with different cabinet depths and heights