Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I draw a cooler row with different cabinet depths and heights?

Choose whether the cabinet bodies align at the front or at the back, and mark that alignment line on the plan. Draw each footprint at its recorded width and depth. JY-LC-318 measures 555 x 550 x 1900 mm; JY-FS-1D measures 620 x 600 x 2010 mm, in width x depth x height order. Give each cabinet a position label so the plan and elevation refer to the same unit.

With the body fronts aligned, the 600 mm-deep JY-FS-1D extends 600 - 550 = 50 mm farther toward the wall than JY-LC-318. With the body backs aligned, the front of JY-FS-1D extends 50 mm farther into the shop instead. If you are comparing their effect on the aisle, draw both options against the same surveyed wall and opposing counter. Add handles, door movement and installation spaces from the drawings for the offered versions beside the body outlines.

In the elevation, mark the floor reference and the bottom and top of each body. If the bodies start at the same height, their tops differ by 2010 - 1900 = 110 mm. If the floor or a proposed base changes the body-bottom height, show that measured or proposed offset separately. Calculate each top position from its own bottom position plus its body height. The 110 mm body-height difference alone does not describe the installed top positions on an uneven floor.

Use the linked wall-projection survey to place skirting and pipe enclosures behind the selected alignment. Send the plan, elevation and labelled photographs through the model inquiry, naming the alignment option and cabinet positions. Include the rear and base drawing details still requested so that the reply can address the wall features at those positions.

Prepare this information

  • Plan names front or back alignment and labels each cabinet position
  • Elevation records each body-bottom position and calculates its top separately
  • Wall features and offered-version fittings appear beside the body outlines

Measure wall projections behind the selected alignment

Matching model records

Discuss your site and product arrangement

Send your equipment brief