Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I identify each cabinet in a multi-cooler shop drawing?

Give each physical cabinet a position label, such as C1, C2 or C3, and put that label beside its outline on both the plan and front elevation. Pair the label with the exact model code in the equipment schedule. For example, C1 and C2 can both be JY-FS-1D, while C3 is JY-FS-2D. A question about C2 then identifies a single cabinet even when the same model appears twice.

Use one schedule row per cabinet. Record the position label, model code and equipment drawing reference, including the drawing revision. Link door and connection details to that position. JY-FS-2D has two glass doors within one cabinet outline, so its doors belong to the same cabinet position. Label a neighbouring end panel separately to distinguish the fixture from the cooler. Where JY-LC-318 sits beside another model, give it its own outline and schedule row.

Put the same position label beside each detail or photograph used in the inquiry. A question about the connection behind C2 should point to the C2 schedule row and a view showing its neighbouring cabinets. Keep the position and model together in the inquiry so the reply can address the intended cabinet. When the survey changes, use the linked handover question to assemble the revised documents and record which revision the reply addresses.

Prepare this information

  • Each physical cabinet has the same position label on the plan and elevation
  • Repeated model codes have separate position labels and schedule rows
  • Details and inquiry photographs identify the cabinet position they address

Hand over a revised survey using these cabinet labels

Matching model records

Discuss your site and product arrangement

Send your equipment brief