JINYU · Planning guide
Planning a row of upright beverage coolers
A row of beverage coolers needs a drawing of the complete arrangement as well as a record for each cabinet. Start by comparing the body widths of the alternatives. Then show the front positions and record the access information from each selected installation drawing. The sum of cabinet widths describes bodies placed together; it does not describe the finished installation opening.
JY-FS-1D measures 620 x 600 x 2010 mm. Two JY-FS-1D bodies therefore total 1240 mm in width, compared with 1100 mm for one JY-FS-2D and 1260 mm for one JY-FS-2DL. All three records give 600 mm depth and 2010 mm height. JY-LC-318 has a different body size of 555 x 550 x 1900 mm, so its width, depth and height need separate treatment when it sits in the same row.
Use the questions below to compare those arrangements, draw a row containing different cabinet sizes and keep each position identifiable. Follow the model links for the recorded specifications and send the proposed row drawing through the equipment inquiry. Keep the cabinet outlines and the installation spaces as separately dimensioned parts of the drawing.
Questions to resolve before ordering
- How do I calculate widths for alternative beverage cooler rows?
- How do I draw a cooler row with different cabinet depths and heights?
- How do I identify each cabinet in a multi-cooler shop drawing?
- How do I plan to replace one cabinet in an existing beverage cooler row?
- What should I measure at a shop doorway before moving in an upright cooler?
- How do I draw door opening and restocking space in a beverage cooler row?
- How do I mark electrical connection positions on a beverage cooler row drawing?
- How do I show cleaning and service access on a beverage cooler row layout?
- How do I record floor levels and cabinet alignment for a beverage cooler row?
- How do I measure wall projections and skirting behind a beverage cooler row?
- How do I measure overhead signs and soffits above a beverage cooler row?
- How do I measure end panels and adjacent fixtures beside a beverage cooler row?
- How do I hand over a revised beverage cooler row survey drawing?
- How do I compare two beverage cooler row layouts on the same shop survey?
- How do I carry a selected beverage cooler row option into the installation drawings?
- How do I revise a beverage cooler installation drawing after a cabinet substitution?
- How do I record site measurement differences against a beverage cooler installation drawing?
- How do I record an agreed cooler layout correction after a site measurement difference?
- How do I record the installed cooler row against a revised layout drawing?
- How do I document a remaining cooler-position difference and the equipment drawing response?