Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What should I record about removable shop fittings on a cabinet replacement route?

Walk the proposed equipment route with the site representative and identify fittings that may be removed. Give each door leaf, trim, shelf or counter panel its own reference on the route plan. Record the clear opening with the fitting in place and identify where each width and height was measured. Photograph the approach, opening and exit using the same fitting reference. Keep these original readings and survey views with the survey date and plan revision. Show fixed building elements separately from fittings proposed for removal.

For each proposed removal, record who will arrange the work and what will remain in the opening. Include projecting hinges, frame returns and thresholds. Keep measured openings separate from proposed clearances. For each dimension copied from a drawing, give the source drawing reference and revision. List assumptions about removal and the resulting opening separately, with the source document or person and date for each. Link each assumption to its fitting reference and measurement location on the route plan.

After removal, add dated measurements of the clear opening at the same survey points, with photographs showing the remaining projections. When a new measurement replaces an assumption, link the dated reading and fitting reference to that assumption in the revised route record. Keep the original readings, photographs and assumptions with their original survey and drawing references. If removal exposes another obstruction or changes where a measurement can be taken, mark the new location on the revised plan and retain the earlier location and reading.

Request the packaged cabinet dimensions and documented handling restrictions for the exact offered model and configuration. Keep the source document reference and revision beside those dimensions and restrictions. Have the responsible handling team compare them with the route and the removal schedule. Identify the selected survey and cabinet or packaging drawing revisions used for that comparison. Distinguish measured openings from proposed or unmeasured clearances, and reference the affected fitting at each unresolved route point.

Send the marked plan and referenced survey views via the inquiry entry, including the removal and reinstatement tasks. Keep earlier route comparisons with the survey and offered drawing references used for each review. If the proposed removal changes, retain the earlier survey and identify the openings that need new measurements on the revised plan. Link later readings to those openings so the handling team can trace which assumptions they replace.

Prepare this information

  • Fitting references, measurement locations and original dated survey views
  • Removal owners, retained projections, copied drawing revisions and separately sourced assumptions
  • Dated post-removal readings linked to replaced assumptions with earlier records retained
  • Exact offered configuration, packaged dimensions and selected survey and drawing revisions
  • Referenced route comparisons, revised measurement locations and reinstatement tasks

Compare the open-front display series

Matching model records

Discuss your site and product arrangement

Send your equipment brief