Should my custom bag inquiry start with stock or a new specification?
Start with the bag family and the feature you need to change. For a small non-woven request, use the stock catalogue to identify a body size and ask which size and colour can be offered. Canvas totes, backpacks and travel bags follow the custom-project route at small quantities. A request for a different body, compartment arrangement or carrying system needs a written construction brief, rather than just a stock product code.
Separate the body request from decoration. A logo file does not describe the bag underneath it, and a stock body photograph does not define the proposed print. Put the intended contents, bag reference or requested dimensions, decoration and quantity on the same inquiry line. This gives the reply a specific combination to address. If you are comparing stock with custom construction, label them as two alternatives so their specifications remain distinct.
How do I identify a stock non-woven bag without confusing the sizes?
Use the catalogue family and variant together. The JY-ST-01 takeaway shopper M reference is 23 × 25 × 14 cm, while L is 25 × 26 × 18 cm. These are outside width × body height × depth measurements, excluding separate loop handles. Write the three numbers in that order with the units, rather than sending only a medium or large label. The table on this page reads the dimensions directly from the catalogue.
Measure the complete contents separately, including their outer packaging. An outside bag depth is not a measurement of usable space inside the seams or opening. Keep requested stock size, offered stock size and the sample used for a packing review identifiable by code. If another size is proposed, retain the original request alongside the alternative and compare each dimension before accepting the change.
What changes when the request is for a custom canvas tote?
Describe the finished tote body independently of the catalogue non-woven references. Give the requested width, body height and base depth, then show the handle attachment positions and the carrying arrangement. State how you measure handle drop. Include an opening or closure description, fabric requirements and the items the recipient will carry. The custom canvas category is the route for that brief; a non-woven stock code does not establish the canvas construction.
Attach artwork with a printed width and height, the required faces and a position measured from identifiable body edges. Label reference photographs by the feature they explain, such as the handle shape or pocket layout. Ask the proposal to identify its offered material and construction against those requests. Keep the sample identifier with the drawing revision so the reviewed tote and the written specification can be compared directly.
What extra information belongs in a backpack or travel bag inquiry?
Show how the main compartment opens and identify separate pockets or divisions. List the largest packed items with dimensions, including protective cases. For a backpack, describe the shoulder straps and the positions where they attach. For a travel bag, distinguish the hand handles from any separate shoulder strap. Record the requested strap width, adjustment endpoints and attachment arrangement instead of treating a lifestyle photograph as a component specification.
Describe the carrying method and the closure operation you want to review with a sample. A zipper, padded panel or particular fabric appearance does not establish water resistance, carrying capacity or compatibility with a laptop. Put any required performance evidence beside its corresponding feature in the brief. The written response can then identify the proposed component or construction and the documents available for that exact proposal.
Can I combine stock bags and custom bags in one inquiry?
Yes: use one project reference with separate bag lines. In the worked brief below, STOCK-A requests the JY-ST-01 M stock reference, while CUSTOM-B describes a requested canvas tote. The custom dimensions are illustrative buyer requirements, not an additional JINYU catalogue size. Give each line its own quantity, body colour request, artwork reference and destination allocation. A project total can help with counting, but each construction still needs its own response.
Keep the stock response and custom proposal attached to their respective lines. For example, a reply identifying an alternative stock colour belongs against STOCK-A; it does not change the requested canvas colour on CUSTOM-B. When the two lines have different receiving destinations, record those destinations explicitly. Bag quantities do not establish carton contents, packed dimensions or transport scope; request the packing proposal against the same line references.
How should I compare the reply with my original bag brief?
Keep a requested column and an offered column for body dimensions, material, handles or straps, closure, decoration and quantity. Attach the drawing or sample reference supporting each offered feature. For stock, compare the complete family-and-variant code. For custom bags, compare the proposed construction drawing with your feature list. An answer to the artwork request alone does not resolve differences in the body or carrying arrangement.
Give a changed proposal a revision identifier and retain the earlier request. If a canvas tote becomes deeper or a travel bag gains another compartment, review the contents and artwork placement against the revised body. Record which differences were accepted and link the accepted drawing, artwork and sample records together. This produces one identifiable specification for the selected line instead of a combination of features from several replies.
What should I send JINYU after choosing the inquiry route?
Send the dated brief to JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司), with the stock product reference or custom construction sketch for each line. Include outside dimensions and units, packed contents, material requests, carrying arrangement, artwork dimensions and revision, requested quantities and receiving destinations. Identify whether you want a stock alternative, a custom proposal or both. Keep reference images connected to the feature they illustrate.
Use the inquiry link with the project reference and describe the documents accompanying your request. Ask the response to identify the offered specification line by line. After reviewing that response, update the brief with the selected references and any accepted changes. Retain the requested and offered records together with the sample observations so later artwork and packing discussions refer to the same bag body and construction.
