Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Grab-and-go counter · Electrical document schedule

Grab-and-Go Counter Electrical Schedule: Rated Watts and Energy Evidence

Compare four JINYU open-front counter power ratings, total a two-cabinet shortlist and request connection documents and model-specific energy evidence.

Compare the four recorded ratings →
JINYU GN-1200L open-front grab-and-go chiller in a cafe or bakery
JINYU GN-1200L · 1200 × 740 × 1400 mm · 950 W rated power

Four open-front models: size, rated watts and recorded supply

Recorded model specifications. Cabinet dimensions are exterior width × depth × height; rated watts are separate from measured daily energy.
ModelCabinet W × D × H (mm)Rated powerRecorded voltage / frequency
GN-900L900 × 740 × 1400820 W220-240V/50Hz
GN-1000L1000 × 740 × 1400840 W220-240V/50Hz
GN-1200L1200 × 740 × 1400950 W220-240V/50Hz
GN-1500L1500 × 740 × 14001080 W220-240V/50Hz

Worked equipment schedule: change one cabinet in a pair

Illustrative quantities: one of each named model. Frontage sums cabinet bodies only; the rated-power total does not establish circuit suitability or energy consumption.
RevisionEquipment linesCabinet frontageSum of rated wattsEquivalent kW
Initial pair1 × GN-900L + 1 × GN-1200L2100 mm1770 W1.770 kW
Revised pair1 × GN-900L + 1 × GN-1500L2400 mm1900 W1.900 kW

Changing GN-1200L to GN-1500L adds 300 mm of cabinet frontage and 130 W to the sum of the recorded ratings. Request the replacement model documents with the revised drawing.

What electrical information belongs in a grab-and-go counter shortlist?

Keep the full model code, quantity, recorded supply and rated watts together on each equipment line. The four JINYU L-series models in this comparison share a recorded 220-240V/50Hz specification, while rated power varies with the model. GN-900L lists 820 W, GN-1000L lists 840 W, GN-1200L lists 950 W and GN-1500L lists 1080 W. Their widths are 900, 1000, 1200 and 1500 mm respectively; all four measure 740 mm deep and 1400 mm high.

Use the table to prepare a document request before reviewing the installation. Carry the exact model code from the floor plan into the electrical schedule. Add the destination and the supply information returned by the site contact. Keep the offered configuration documents alongside that line so purchasing and installation colleagues can identify the same cabinet.

How do I total the rated watts for two proposed counters?

For an illustrative two-cabinet arrangement, enter one GN-900L and one GN-1200L on separate lines. Multiplying each model's recorded rated watts by its quantity gives 820 W and 950 W. Adding the two lines gives 1770 W, or 1.770 kW. Their combined cabinet frontage is 2100 mm when placed side by side; the layout still needs the selected model installation information to establish its full space requirements.

The sum describes the two catalogue ratings carried into this example. It does not establish circuit suitability, simultaneous measured demand or startup behaviour. Give the installation reviewer both equipment lines and the corresponding configuration documents. If other equipment shares the proposed location, list those items separately with their own documentation instead of treating the two-cabinet total as the entire site's electrical requirement.

Does rated power tell me daily electricity consumption?

Rated watts and measured energy answer different questions. The model records here provide a power rating in W. A daily energy record would describe energy in kWh over an identified period and under identified operating conditions. These four model records do not provide such a daily measurement. Leave the energy field as a document request when comparing proposals rather than substituting a number calculated from the rating.

For example, multiplying the illustrative 1.770 kW total by 24 hours produces 42.48 kWh mathematically. That calculation assumes both ratings apply continuously for all 24 hours. It is not a measured daily consumption figure for either cabinet or for the pair. Request model-specific energy evidence with the tested configuration, measurement period and conditions, and retain those details with the result before using it in an operating comparison.

What changes if the 1200 mm model becomes the 1500 mm model?

Revise the equipment line and the drawing together. Replacing GN-1200L with GN-1500L changes that line from 950 W to 1080 W, a difference of 130 W. In the illustrative pair with one GN-900L, the revised sum is 1900 W, or 1.900 kW. The total cabinet frontage becomes 2400 mm, an increase of 300 mm. Recorded depth and height remain 740 and 1400 mm.

Keep the earlier schedule revision so the reason for the new totals remains visible. Identify the revised model in the inquiry, the floor drawing and the requested installation documents. A common voltage and frequency entry does not resolve the remaining installation details. Ask the reviewer to use the replacement configuration documents when considering the revised arrangement, rather than carrying an answer about GN-1200L into the GN-1500L proposal.

Which connection details should I request for the offered configuration?

Ask for the electrical data and connection instructions tied to the complete model and configuration being offered. Request the connection arrangement, cable entry location and any supplied connection components described in those documents. Include the cabinet position and the location of the proposed supply point on the site drawing. Keep the document reference beside the equipment line instead of describing the connection solely as a nearby socket.

Obtain the site's supply description from its responsible contact and send it with the inquiry. The published 220-240V/50Hz entry supplies one comparison field; it does not identify the site's wiring or the connection components on a particular offered unit. Have the person responsible for the installation assess those details against the actual site record. Record their questions using the same model and drawing references so each response can be attached to the correct line.

How should I compare energy evidence from different proposals?

Put the evidence reference in a separate column from rated watts. Record the tested model code, configuration, measurement period, reported energy value and the stated test conditions. When a document covers a different model or arrangement, keep that identity visible. Ask the respondent to explain how the supplied evidence relates to the equipment line being considered before using it to compare the shortlisted cabinets.

Preserve the units exactly as reported. A value in W should remain a power entry, while an energy result in kWh needs its period alongside it. Keep the original document and your comparison sheet together. If a revised proposal changes the cabinet, request the corresponding evidence again under the new code. This connects the comparison to the proposed equipment rather than to a similar photograph or a series-wide statement.

What should I send JINYU with the electrical schedule?

Send the selected model codes and quantities, the site drawing, destination and written site supply description. Attach the schedule revision, the two-cabinet calculation if relevant, and any existing configuration or energy documents you want compared. Mark the question on its own equipment line: connection location, offered supply specification, replacement model or energy evidence. This gives the response a defined subject.

Address the inquiry to JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). Ask for the offered configuration and installation documents against each model code. Keep the returned references in the worksheet below, then pass that same revision to the site reviewer. When a model or quantity changes, update the arithmetic and the drawing before using the response for the final equipment schedule.

Electrical and energy document inquiry worksheet

Keep one equipment line per model and retain the returned document references with that schedule revision.
RecordBuyer inputRequested response
Equipment identityModel code, quantity and schedule revisionOffered configuration and model document reference
Recorded supply220-240V/50Hz beside each selected modelConfiguration-specific supply and connection instructions
Rated powerCatalogue W by model and quantityOffered model electrical data
Connection locationSupply-point position on the site planConnection arrangement and cable entry drawing
Site reviewWritten site supply description and responsible contactReview against the offered installation documents
Energy evidenceRequested comparison period and intended arrangementTested model, kWh, measurement period and conditions
Model changeOld and replacement codes, quantities and drawing revisionsUpdated documents and recalculated equipment lines
Send your model schedule and document questions →

Place electrical and condensate service points on a measured counter plan: keep site coordinates separate from the returned cabinet connection drawing.