How do I filter a non-woven bag size chart by my required dimensions?
Enter three minimum catalogue body dimensions in width, body height and gusset depth order. Choose centimetres or millimetres before applying the filter. The results compare those numbers with each recorded variant and keep the same axis order throughout. They do not rotate the contents or convert a flat bag into a gusseted bag. Start with dimensions from a measured sample or your proposed finished body drawing, then use the shortlist to request the corresponding styles.
For example, the starting values are 30 cm wide, 35 cm high and 10 cm deep. A recorded body must reach all three values to appear in the dimension shortlist. A larger height cannot compensate for a smaller width. The complete catalogue remains below the filter, so you can review excluded variants and their actual dimensions without losing their product references.
Does a shortlisted size mean my box will fit inside?
The result describes catalogue body dimensions only. A sewn non-woven bag has seams, a top opening, handles and possibly a closure that affect loading. A box can be smaller than the listed outside body on every axis and still meet an obstruction at the opening. Keep the packed box dimensions separate from the minimum body dimensions entered here, and test the selected sample with the complete contents.
Measure the box after adding wrapping, protective corners or other packaging. Record its intended upright direction and the way it enters the bag. Photograph the insertion and removal sequence as well as the seated position. That evidence links the numerical shortlist to the real packing task. The filter supplies a starting catalogue comparison; the sample trial supplies observations about that particular bag and load.
Why are flat bags shown as depth not recorded?
A flat style in this catalogue has a zero in the depth field to identify its format. That entry is not a measured expandable depth, and the filter does not treat it as one. When its width and height meet your entries, the style appears in a separate depth-not-recorded group. A flat variant with insufficient width or height remains below the entered dimensions regardless of its depth field.
Use that separate group when you are comparing flat garments, documents or other contents for which a flat construction may be relevant. Open the product page to review its handles and closure. If a project calls for a defined gusset, ask about the recorded gusseted styles instead. Do not assign a calculated depth to a flat bag from its width or from an assumed volume.
Can I compare millimetres with the centimetre catalogue?
Yes. Selecting millimetres divides your entered values by ten before the comparison. A 300 × 350 × 100 mm entry is therefore the same screen as 30 × 35 × 10 cm. The catalogue table continues to show centimetres and labels the order as width, body height and gusset depth. The selected unit describes the input fields, while the table heading describes the recorded output.
Changing the unit selector does not rewrite the numbers in the fields. Replace the entries with values in the newly selected unit, then apply the filter. The result message repeats the converted centimetre values so you can check the scale immediately. Retain the original unit labels in the inquiry drawing and measurement photographs; an unlabelled number such as 350 gives the reader no reliable dimension reference.
Should I include handles in the body-height entry?
Use body height for the height field. Handle drop and overall hanging height describe different measurements and belong in separate entries in your brief. A bag listed with a 35 cm body is not thereby specified with a 35 cm handle drop. Likewise, the usable opening can be affected by a handle attachment or closure without changing the catalogue body height.
When comparing an existing sample, photograph the bottom and top body measurement endpoints, then record the handle separately. Add the loaded handle position if shoulder carrying is part of the intended use. The dimension filter cannot compare handle lengths because those values are not provided for every catalogue variant. Keep that request attached to the exact style and variant selected from the chart, rather than extending one sample's handle measurements to the entire range.
How do I keep the selected style and variant clear in an inquiry?
Record the style name, variant code and all three catalogue dimensions together. Several styles can share a code or similar dimensions while using different handles, closures or construction. The table links each row to its product page and displays its construction format. Keep more than one shortlisted row if you are still comparing those differences, and identify the preferred sample reference for each one.
Send JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司), the shortlist with your contents measurements, intended packing orientation and destination. For a small non-woven order, ask about available stock in the selected size and colour. A dimension match does not record availability. Custom dimensions should be described with a finished-body drawing and reviewed separately from the catalogue variants displayed in this filter.
What should I do when no recorded gusseted size reaches my entries?
Check the unit and axis order first. Width and height cannot be interchanged silently, and a depth entered in millimetres while centimetres are selected changes the request by a factor of ten. Review the full catalogue table to see which dimension falls below your entry. The result groups preserve that distinction instead of offering the closest numerical size as an automatic substitute.
If the input is correct, keep the original requirement in your inquiry. You can ask about another construction or a custom finished size, using the measured contents and a drawing to explain the request. If the contents may be turned, document the alternative orientation and rerun the body-dimension screen with a separately chosen requirement. Preserve both records so the proposed change stays visible to the person reviewing the sample.
