Which way should a box face in a non-woven bag size chart?
Assign the box edges to the same axes used by the bag chart: width across the front, height upward and depth from front to back. Measure the complete packed box, including any sleeve, lid overhang or wrapping. Write down which face must remain underneath. A carton that can travel on any face permits more arrangements than a cake box or a gift with loose contents. Keep that handling instruction beside the measurements.
The worked example here is a hypothetical 24 × 16 cm box base with a 10 cm height. Its upright arrangement is therefore W24 × H10 × D16 cm. Turning it a quarter turn on that same base gives W16 × H10 × D24 cm. Both keep the lid above the contents; tipping the box onto a side changes the handling arrangement. The table lists all six axis assignments so these choices can be compared explicitly.
Why can a wider shopper fail the upright box comparison?
JINYU takeaway L has a recorded body size of W25 × H26 × D18 cm. Subtracting the upright example box, W24 × H10 × D16 cm, leaves numerical differences of +1 cm width, +16 cm height and +2 cm depth. The gusseted shopper STD is wider and taller at W40 × H35 × D15 cm, but the same subtraction gives +16, +25 and -1 cm. Its recorded depth is smaller than the example box base.
That comparison explains why choosing the widest front panel can miss the limiting dimension. The takeaway L row clears this outside-dimension screen, while the shopper STD row has a depth conflict in the upright position. Neither result supplies an internal opening measurement. Use the first result to request a sample trial; retain the second as a specific depth question rather than assuming the extra front width resolves it.
What do the six box orientations reveal?
For three unequal box edges there are six assignments to width, height and depth. In this example two retain the 10 cm height, two put the 16 cm edge upright and two put the 24 cm edge upright. They all describe the same physical box. The table compares each assignment against the three recorded bag bodies and shows the signed differences in width, height and depth. A negative number identifies an outside-dimension conflict on that axis.
For shopper STD, W24 × H16 × D10 cm produces positive differences on every axis, unlike the upright W24 × H10 × D16 cm arrangement. The box would now rest on a different face. If its contents must stay upright, that row cannot answer the original packing request. Select the permitted orientations before shortlisting bags, then keep the chosen row identifier on the sample request.
Does a zero or positive size difference establish usable clearance?
The differences compare catalogue body dimensions with a rectangular box outline. They do not measure the clear distance between seams, the opened base or the handle attachments. A zero difference leaves no numerical allowance in that axis even before those construction details are assessed. A positive difference remains an outside-dimension result until the actual bag and packed box are measured together.
Takeaway M measures W23 × H25 × D14 cm. A sideways W16 × H24 × D10 cm box gives differences of +7, +1 and +4 cm. The small height balance makes the height endpoints relevant: record whether the box rim is below the bag mouth and whether the handles meet in the carrying position. Use measurements and photographs from the sample being reviewed rather than assigning a universal clearance to every non-woven construction.
How should loading through the opening be checked?
Record the final seated orientation and the loading movement separately. Photograph the mouth held open, then show the box entering, reaching the base and being removed. Identify any point where a corner meets a seam or handle attachment. Keep the wrapping and lid on the box during the trial if those parts will be present when staff pack the order. An empty carton without its sleeve represents a different packed outline.
For the upright 24 × 16 cm base, ask the demonstration to preserve the 10 cm height throughout the movement. If loading requires tipping the contents, record that observation against the upright request. Include the actual intended contents in a later handling review where appropriate. Catalogue dimensions provide a shortlist; the trial documents the opening, orientation and sequence used with the selected sample.
How should the selected bag and trial be recorded in the inquiry?
Name the style and variant together: takeaway M, takeaway L or gusseted shopper STD. Keep the original catalogue dimensions, the measured packed box and the permitted orientation in separate fields. Add the sample identifier, photograph references and the date of the trial. If the response proposes another stock size, create a separate alternative row with its complete dimension order and construction description.
Small quantities of non-woven bags use the stock route. Ask which stock size and colour combinations are available for the requested quantities; the chart identifies references rather than current inventory. Send the brief to JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司), using the inquiry page. Keep custom canvas totes, backpacks and travel bags on their respective custom routes.
What changes when there are two boxes or protective inserts?
Measure the finished combined packing arrangement. Two identical example boxes stacked upright have a bare envelope of W24 × H20 × D16 cm; inserts and wrapping can enlarge it. Two placed side by side with their 16 cm edges across the front occupy W32 × H10 × D24 cm. These are calculated examples, not supplied bag sizes or tested packing arrangements. Record the selected arrangement before comparing it with the chart.
Repeat the trial with the complete order contents and identify the bottom support used. Keep a separate handling record for weight and carrying observations; width, height and depth do not provide a load rating. When the box, insert or quantity changes, update the packed outline and sample reference so the selected bag remains tied to the arrangement actually reviewed.
