JINYU · Planning guide
Topping prep fridge selection: pans, reach and counter access
Start a topping-station brief with the menu and the order in which staff assemble each dish. Count ingredients needed simultaneously, then mark their positions beside preparation, finishing and replenishment tasks. The rail is one part of that arrangement; reserve stock and a working surface need their own places.
GN-1130SC has four 1/3 GN positions in a 1130 × 405 × 280 mm body. GN-1305SC has five positions and measures 1305 × 405 × 280 mm. GN-1830SC has eight positions in a 1830 × 405 × 280 mm body. These recorded layouts support an initial comparison of counter length and ingredient separation.
Position counts do not establish pan depth, supplied accessories, food quantity or comfortable reach. The questions below separate those decisions so the quotation review can identify the actual pans, supports, lid envelope and working positions. Compare each proposed configuration against its own drawing.
Bring the proposed bench plan, pan measurements and ingredient sequence to the inquiry. Include overhead shelves and nearby ovens in the drawing. A reviewed counter arrangement should explain how staff take an ingredient, change a pan and return the lid without losing the space needed to assemble food.
Questions to resolve before ordering
- How do I select a topping fridge from the number of ingredients on my menu?
- How do I check whether my existing ingredient pans fit a topping fridge?
- What is the difference between pan count and working ingredient capacity?
- Should a pizza station use one long topping rail or separate short rails?
- How do I measure lid clearance above a countertop topping fridge?
- What should I consider when placing a topping fridge beside a pizza oven?
- How do I compare a glass-covered topping display with a hinged-lid rail?
- What should I measure when replacing a topping fridge on an existing prep bench?
- How do I plan ingredient access for staff working from opposite ends of a pizza line?
- What information should I send about pan depth before choosing a topping fridge?