Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What should I measure when replacing a topping fridge on an existing prep bench?

Measure the clear usable bench length and depth, then record the positions of rear upstands, shelf brackets, sockets and cable routes. Photograph the existing rail in place and again with its surrounding work area visible. The old appliance's outline alone does not show whether the replacement has the same supports, air openings or service access.

GN-1305SC measures 1305 × 405 × 280 mm. Use that body envelope to start a scaled drawing, then request support-point and installation information for the offered unit. Ask the bench provider to review its loading and support arrangement using the appliance details; do not assume that a bench suitable for the old cabinet suits every replacement.

Preserve the preparation space in front of the rail on the drawing. Check lid movement, pan removal and the position from which staff will replenish. Include the electrical connection location without assuming that a matching plug proves compatibility. Send the old model reference and measured bench plan with the inquiry so differences are resolved before the replacement arrangement is accepted.

Prepare this information

  • Measured bench and projections
  • Support arrangement review
  • Old model and replacement drawing

Review the topping rail comparison

Matching model records

Discuss your site and product arrangement

Send your equipment brief