Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I measure lid clearance above a countertop topping fridge?

Measure from the finished bench surface to the underside of the nearest shelf, canopy or other obstruction. Then request a side drawing showing the lid in its fully open position. Closed body height is only the starting dimension; it does not show the moving lid envelope or the hand space needed to lift and replace a pan.

GN-1305SC has a recorded body size of 1305 × 405 × 280 mm and a hinged lift-up lid. The 280 mm figure does not specify its open-lid height. Mark the proposed rear position and overhead shelf on the drawing, including shelf brackets or lights that project below the main surface.

Check the complete task at the intended working position: opening the lid, reaching the rear pan edge and lifting a pan clear of its supports. A lid that just misses a shelf may still leave awkward handling space. Send a measured side photograph and bench elevation with the inquiry. Keep the accepted opening envelope on the counter drawing so later shelving changes can be checked against the same arrangement.

Prepare this information

  • Bench-to-shelf height
  • Open-lid side drawing
  • Pan removal envelope

Review the topping rail comparison

Matching model records

Discuss your site and product arrangement

Send your equipment brief