JINYU · Buyer question
How do I plan to replace one cabinet in an existing beverage cooler row?
Identify the cabinet being removed by its position label on the existing row survey. Measure between the neighbouring cabinet or joinery faces that define its opening, and photograph those endpoints. Mark which endpoints are fixed and which can move. Record the existing body width separately from the opening width, since panels and spaces may occupy part of that opening.
For example, replacing a JY-FS-1D body with a JY-FS-2D increases the body width from 620 mm to 1100 mm, a difference of 480 mm. If the left body edge stays in place, draw the new right body edge 480 mm farther to the right. This shows where the replacement meets the surveyed neighbouring fixtures. It does not establish the opening needed for installation.
Add the spaces and panel dimensions shown on the offered installation drawing around the new body outline. Mark any neighbour or panel that would move, and dimension its proposed position from the same fixed survey point. Show door movement, connection locations and access details on that option drawing, using the offered version. Identify details still requested beside the affected cabinet position.
Send the existing survey, replacement overlay, and referenced photographs through the model inquiry. Name the candidate model and the cabinet position in the question so the reply addresses that opening. Once you select a replacement, follow the linked drawing-revision guide to carry its changes into the installation set. Compare whole-row alternatives separately when several cabinet positions change.
Prepare this information
- Measured opening endpoints and the removed cabinet position appear on the survey
- Replacement body edges and any neighbour movement use the same fixed survey point
- Candidate drawing separates body width from installation spaces and access details
Revise the installation drawings for the selected replacement