Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I measure end panels and adjacent fixtures beside a beverage cooler row?

Label the first and last cooler positions C1 and C3 on the row plan. Give the adjacent end panel or counter a reference such as P1. Measure its nearest face using the same rear-wall and front reference lines as the cabinets. Record panel thickness, depth and height, with separate dimensions for brackets, handles and counter overhangs. Mark whether P1 is installed or proposed. A photograph labelled P1 connects the measured projection to the correct fixture.

For an illustrative survey beside C3, suppose the counter side is 90 mm from the proposed cabinet side, but the counter top overhangs 30 mm toward the cabinet. The horizontal distance to the counter edge is then 90 - 30 = 60 mm at counter-top height. Show the side face and the overhang on separate dimension lines, and record the height of that edge in the elevation. These are example site dimensions. The 60 mm distance describes one fixed obstruction; the door and handle movement drawings show whether their paths cross that edge.

Draw the selected body footprint beside P1. JY-LC-318 has a recorded depth of 550 mm; JY-FS-1D and JY-FS-2D are 600 mm deep. Show the chosen front alignment so the panel depth can be read against the correct cabinet position. Add door movement, ventilation space and service-panel removal paths from the drawings for the offered version. Draw the adjacent counter drawer or cupboard door in its open position too. Send the plan, elevation and labelled photographs through the inquiry with the model code and C3/P1 references. For the separate survey of the route into the shop, use the linked doorway question.

Prepare this information

  • End fixture labelled as installed or proposed against the cabinet reference lines
  • Panel face, overhang, projecting fittings and their heights dimensioned separately
  • Cabinet and adjacent fixture movement drawn beside the fixed obstruction

Measure the shop doorway and delivery approach

Matching model records

Discuss your site and product arrangement

Send your equipment brief