Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What should I measure at a shop doorway before moving in an upright cooler?

Give each doorway on the delivery route a reference such as D1. With the door in its intended delivery position, measure the narrowest clear width and the height from the threshold to the lowest obstruction. Include handles, closers and projecting trim in the survey. Record the threshold step and photograph D1 from both sides. A door-leaf or frame size does not describe the usable opening beside a projecting handle.

For an illustrative D1 survey, suppose the clear opening is 780 mm wide and 2050 mm high. JY-FS-1D has a recorded body size of 620 x 600 x 2010 mm, in width x depth x height order. Comparing the body upright and facing the opening gives 780 - 620 = 160 mm of total width difference and 2050 - 2010 = 40 mm of height difference. These differences do not account for packaging and handling equipment. Record the confirmed package size and the loaded handling equipment dimensions beside the body dimensions, so the route drawing represents the proposed move.

Measure the approach depth on each side of D1 and the distance to the next wall, counter or turn. Show these measurements on a route sketch together with the doorway width, overhead projections and threshold step. Ask the handling provider to draw the movement through D1 using the package and equipment dimensions, and mark any proposed unpacking position. Request the handling instructions for the selected version before planning a tilt or removal of parts. Send the referenced photographs and sketch through the inquiry with the model code. The linked end-panel question covers the fixed fixtures beside the final cooler position.

Prepare this information

  • Doorway reference matches clear width, clear height and photographs from both sides
  • Body comparison kept separate from package and loaded handling equipment dimensions
  • Route sketch locates the approaches, turn, threshold and any unpacking position

Measure end panels and adjacent counter fittings

Matching model records

Discuss your site and product arrangement

Send your equipment brief