JINYU · Buyer question
How do I revise a beverage cooler installation drawing after a cabinet substitution?
Keep the cabinet position reference when changing its assigned model. Record the previous model, selected replacement, and drawing revision in the change note. For example, B2 changes from JY-FS-1D to JY-FS-2D while B1 remains JY-LC-318. Update the B2 schedule row and identify the revised plan and elevation by date and revision. Link the change note to the replacement comparison so the selected model can be traced back to the options considered.
Update the cabinet outline and dimensions affected by the substitution. With JY-LC-318 at B1, the combined body width changes from 555 + 620 = 1175 mm to 555 + 1100 = 1655 mm. If B2 keeps its left edge, its right edge moves 480 mm farther along the row. Show any moved end panel relative to the survey reference line, with panel thickness and installation spaces dimensioned separately. Both B2 models have a recorded body depth of 600 mm. Keeping the same front alignment therefore preserves the drawn rear body edge. Mark any deliberate alignment change on the plan.
Carry B2 into the elevation with the same fixed height datum. Both models have a recorded body height of 2010 mm. For an illustrative unchanged body-bottom level of +20 mm, the top remains 20 + 2010 = 2030 mm. If the revised support arrangement instead places the body bottom at +30 mm, the top becomes 30 + 2010 = 2040 mm, an increase of 10 mm. For an illustrative sign underside at +2200 mm, the vertical gap changes from 2200 - 2030 = 170 mm to 2200 - 2040 = 160 mm. These example levels describe drawing geometry. Use the offered support details to establish the proposed body-bottom level and record it separately from measured floor levels.
Replace the B2 equipment drawing reference with the number and revision for the offered JY-FS-2D version. Update door movement, connection positions, ventilation spaces, and maintenance access from that document. Equal body depth and height do not establish matching installation details. List the affected plan, elevation, schedule and detail revisions in the drawing issue. Send that set through the inquiry with a question about a marked change at B2, and keep the reply with the same model assignment and revision. The linked selected-option answer describes the original drawing set.
Prepare this information
- Retained position label identifies the previous and replacement models
- Revised plan marks width changes and retains or revises the selected alignment
- Elevation records the height datum, body-bottom level and recalculated top and overhead gap
Carry the selected option into the original drawing set