Nine models · four to ten pan positions
Topping Prep Fridge Pan Capacity Comparison: SC vs SB
Compare six SC hinged-lid rails and three SB glass-cover displays using recorded pan positions, cabinet dimensions, capacities and electrical ratings.
Compare all nine models →
Topping prep fridge dimensions and pan positions
Compare matched SC and SB cover heights and calculate the side view beneath an overhead shelf.
Check SC rail fit on 1500, 1800 and 2100 mm worktops using exact model widths and calculated length remainders.
| JINYU model | Upper access | W × D × H (mm) | Capacity | Exterior worktop area (m2) | Rated power | Pan positions | Temperature range |
|---|---|---|---|---|---|---|---|
| GN-1130SC | Hinged lift-up lid | 1130 × 405 × 280 mm | 42 L | 0.458 | 130 W | 4 x 1/3 GN | 2-12 °C |
| GN-1305SC | Hinged lift-up lid | 1305 × 405 × 280 mm | 52 L | 0.529 | 135 W | 5 x 1/3 GN | 2-12 °C |
| GN-1655SC | Hinged lift-up lid | 1655 × 405 × 280 mm | 72 L | 0.670 | 150 W | 7 × 1/3 GN | 2-12°C |
| GN-1830SC | Hinged lift-up lid | 1830 × 405 × 280 mm | 82 L | 0.741 | 165 W | 8 x 1/3 GN | 2-12 °C |
| GN-2005SC | Hinged lift-up lid | 2005 × 405 × 280 mm | 92 L | 0.812 | 170 W | 9 × 1/3 GN | 2-12°C |
| GN-2180SC | Hinged lift-up lid | 2180 × 405 × 280 mm | 102 L | 0.883 | 183 W | 10 × 1/3 GN | 2-12°C |
| GN-1655SB | Glass cover | 1655 × 405 × 450 mm | 72 L | 0.670 | 150 W | 7 × 1/3 GN | 2-12°C |
| GN-1830SB | Glass cover | 1830 × 405 × 450 mm | 82 L | 0.741 | 165 W | 8 × 1/3 GN | 2-12°C |
| GN-2180SB | Glass cover | 2180 × 405 × 450 mm | 102 L | 0.883 | 183 W | 10 × 1/3 GN | 2-12°C |
All nine records list countertop installation, static cooling, automatic defrost and 220-240V/50Hz. Exterior worktop areas exclude installation clearances and circulation space.
Which topping prep fridge sizes cover four to ten ingredient pans?
The JINYU SC range has six countertop models with four, five, seven, eight, nine or ten positions for 1/3 GN pans. Cabinet lengths run from 1130 to 2180 mm. The SB glass-cover range supplies three comparison points: seven positions at 1655 mm, eight at 1830 mm and ten at 2180 mm. All nine cabinets are 405 mm deep. SC cabinets are 280 mm high; SB cabinets are 450 mm high.
Start a pizza or salad preparation brief by listing ingredients that need separate containers. Give each container a proposed position before choosing the cabinet length. A pan-position count describes the rail arrangement. It does not establish the number of meals, pizzas or customers that a station can serve in an hour.
What changes between a hinged lid and a glass cover?
SC models have a hinged lift-up lid. SB models have a glass cover. At the three shared lengths, both families record the same pan count, capacity and rated power: seven positions and 72 L at 1655 mm, eight and 82 L at 1830 mm, and ten and 102 L at 2180 mm. The SB cabinet is 170 mm taller at each of these lengths.
Draw the upper cabinet profile beside nearby shelving and the staff working position. Request the SC lid-opening envelope or the SB cover and access dimensions for the exact model. Use those drawings to review ingredient retrieval and cleaning access. The 170 mm difference is a comparison of overall cabinet heights; it does not describe the SC lid's fully raised height.
How much counter length does one more pan position require?
Moving from GN-1130SC to GN-1305SC adds 175 mm of cabinet length and one 1/3 GN position. Moving from GN-1655SC to GN-1830SC also adds 175 mm and one position, as does moving from GN-1830SC to GN-2005SC or from GN-2005SC to GN-2180SC. The jump from GN-1305SC to GN-1655SC is 350 mm and adds two positions. There is no six-position SC model in this comparison.
Use the actual model lengths when marking a counter. For example, replacing the 1830 mm SC rail with the 2180 mm SC rail adds 350 mm and two positions. Show which ingredients would occupy those positions, then measure the adjacent assembly area separately. The extra rail length occupies part of the counter even when the additional containers hold small ingredients.
Can I compare seven-, eight- and ten-pan models directly?
Yes. The SC and SB families have matching lengths at 1655, 1830 and 2180 mm, with seven, eight and ten pan positions respectively. Their capacities are 72, 82 and 102 L, and their rated powers are 150, 165 and 183 W. Compare each matched pair on the same scale drawing, keeping the different heights and cover arrangements visible.
For a seven-position brief, identify GN-1655SC or GN-1655SB rather than requesting only a 1655 mm rail. Carry the full code through the equipment schedule, photographs and returned drawings. A shared length and capacity do not make the lid and glass-cover versions identical. The model identity tells the recipient which access arrangement and upper profile to address in the reply.
How do I calculate the space occupied on the worktop?
Multiply cabinet length by the shared 405 mm depth. The six SC exterior rectangles are approximately 0.458, 0.529, 0.670, 0.741, 0.812 and 0.883 square metres in ascending model length. Each SB model has the same exterior rectangle as the SC model of equal length. These figures are rounded to three decimal places and describe the cabinet outline on a plan.
Mark that outline on the worktop, then draw the remaining assembly surface, ingredient transfer route and access to nearby equipment. Request installation spacing and support information separately. The rectangle alone gives neither the required installation opening nor a worktop load rating. Ask for equipment weight and the intended support arrangement before having the counter reviewed for the chosen configuration.
Which cooling and electrical specifications belong on the schedule?
All nine recorded models use static cooling and automatic defrost, with a temperature range of 2-12°C and a supply specification of 220-240V/50Hz. SC rated power rises from 130 W on GN-1130SC to 183 W on GN-2180SC. GN-1305SC is 135 W, GN-1655SC 150 W, GN-1830SC 165 W and GN-2005SC 170 W. SB ratings are 150, 165 and 183 W for the three listed lengths.
Keep the power and supply fields attached to each model code on the equipment schedule. Rated power does not measure daily electricity use. Match the proposed ingredients to their own storage requirements and request operating documentation for the offered configuration. These specifications alone do not establish suitability for a particular food or preparation process.
Are the pan count and listed litres enough to order containers?
Each position in this comparison is recorded as 1/3 GN, but that description does not provide a supplied-pan list or a pan-depth specification. Listed cabinet capacity ranges from 42 to 102 L in the SC family and from 72 to 102 L in SB. Those capacities do not specify ingredient fill quantities for the containers you plan to use.
Send the container dimensions, depth and rim profile with the inquiry, together with photographs of existing pans if they will be reused. Request the pan layout and supplied-item list for the selected cabinet. Number the positions on the returned drawing and connect them to the ingredient list. This keeps container compatibility, package contents and the service arrangement as identifiable questions within the same model brief.
What should a pizza or salad counter comparison inquiry contain?
Send the shortlisted SC and SB model codes, the measured counter length and depth, and a side-view drawing showing nearby shelves. Add site photographs, ingredient allocation, pan measurements and the electrical supply. Mark where assembly takes place beside the rail and how staff replenish ingredients. For receiving access, include doorway and turn measurements and request packing dimensions and handling information.
Address the inquiry to JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司), using the linked inquiry form. Ask for the installation drawing, upper access envelope, equipment weight and supplied-item list for each shortlisted configuration. Keep those replies beside the nine-model table so comparisons use the same model identity from the first layout sketch through the returned technical documents.