Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Topping fridge · Rated power · Electrical documentation

Topping Fridge Power and Voltage: Equipment Schedule

Compare rated power of six JINYU SC topping fridges at 220-240V/50Hz. Download a W/kW schedule and compare two short rails with one ten-position model.

Six model ratings · Two equipment options · Buyer questions

JINYU GN-1130SC countertop topping prep fridge on a service counter
JINYU GN-1130SC: four pan positions and recorded rated power of 130 W.

Six topping-fridge electrical entries

One unit per model. kW is calculated as recorded watts divided by 1000.
ModelBody lengthPan positionsRated power (W)Rated power (kW)Voltage / frequency
GN-1130SC1130 mm4 x 1/3 GN130 W0.130 kW220-240V/50Hz
GN-1305SC1305 mm5 x 1/3 GN135 W0.135 kW220-240V/50Hz
GN-1655SC1655 mm7 × 1/3 GN150 W0.150 kW220-240V/50Hz
GN-1830SC1830 mm8 x 1/3 GN165 W0.165 kW220-240V/50Hz
GN-2005SC2005 mm9 × 1/3 GN170 W0.170 kW220-240V/50Hz
GN-2180SC2180 mm10 × 1/3 GN183 W0.183 kW220-240V/50Hz

These records supply rated watts and voltage/frequency. They contain no measured daily energy consumption, starting-current figure, plug type or cable length.

Download the power and equipment schedule (CSV) →

Worked alternatives: two four-position rails or one ten-position rail

Illustrative alternatives. Totals cover cabinet bodies and recorded ratings; installation spacing is additional.
OptionModel × quantitySummed body lengthSummed positionsSummed capacitySummed rated power
Two short unitsGN-1130SC × 22260 mm884 L260 W
One long unitGN-2180SC × 12180 mm10102 L183 W

The two-unit option totals 80 mm more body length and 77 W more rated power, with two fewer pan positions and 18 L less listed capacity. The ratings do not measure the options' daily energy consumption.

How much rated power does a topping fridge use?

The six JINYU SC topping fridges list rated power from 130 W to 183 W. GN-1130SC is 130 W, GN-1305SC is 135 W and GN-1655SC is 150 W. The longer GN-1830SC, GN-2005SC and GN-2180SC records list 165 W, 170 W and 183 W respectively. All six specify 220-240V/50Hz. Keep the complete model code beside both electrical fields when preparing an equipment schedule: a request for a topping fridge alone leaves six different entries to choose from.

The table separates watts from pan positions and cabinet length. Start with the ingredient arrangement, select the relevant model, then copy that model's electrical data into the purchasing record. The rating identifies the recorded configuration; it does not provide a measured running profile. A daily electricity figure needs consumption evidence for the actual model and the conditions being compared. The six catalogue watt figures provide a consistent starting point for requesting those documents.

What is the difference between rated watts and daily energy consumption?

Watts describe power; kilowatt-hours describe energy over time. Converting the GN-1130SC rating from 130 W to 0.130 kW changes the unit without adding any operating evidence. Likewise, GN-2180SC's 183 W becomes 0.183 kW. Neither conversion establishes how many hours the appliance draws a particular input during a working day. The SC records used here contain rated power, voltage and frequency, but no measured daily kWh result.

When comparing energy information, request the model code, measurement period, room conditions, loading arrangement and method attached to the reported result. Keep that response in a separate field from rated power so an estimate cannot replace a catalogue rating during purchasing. If two proposals use different test conditions, preserve both descriptions beside their figures before comparing them. The downloadable schedule deliberately records W and kW as rating units; it leaves operating consumption to the model-specific evidence returned with your inquiry.

How do two short rails compare with one long topping fridge?

Consider two GN-1130SC units as an illustrative alternative to one GN-2180SC. Two short units provide eight recorded 1/3 GN positions in total, with 84 L of summed capacity and 260 W of summed rated power. Their body lengths total 2260 mm. One GN-2180SC provides ten positions, 102 L, 183 W and a 2180 mm body length. Relative to the single long unit, the pair adds 80 mm of summed body length and 77 W of rated power while providing two fewer positions and 18 L less listed capacity.

Those totals describe equipment quantities. Two units might occupy separate stations, so the summed length does not require a continuous counter. If they sit together, the plan must also show the installation spacing specified for each unit. The comparison does not establish energy savings or a shared electrical connection. Use it to decide which arrangement deserves a detailed layout and documentation request for your actual preparation sequence.

Does 220-240V/50Hz establish the plug and connection arrangement?

The recorded voltage and frequency are 220-240V/50Hz for every SC model in this comparison. The source fields do not identify a plug type, cable length, starting current or connection layout. Keep those items as document requests tied to the selected model and destination. A proposal carrying a different supply description should retain its own configuration identifier so the original catalogue line remains traceable.

Send a photograph and marked location of the proposed connection with the counter plan. Ask for the offered appliance's nameplate information and installation documentation, including cable exit and supplied connection details. The person reviewing the site installation can then compare that response with the premises information. For a two-unit arrangement, identify station A and station B separately on both the plan and the equipment schedule. This gives each returned document a specific location and prevents one appliance's response from being applied to both stations by assumption.

How should the downloadable equipment schedule be used?

The CSV lists the six SC models with one illustrative unit of each, their cabinet length, pan-position count, recorded watts, converted kilowatts and supply. The last two rows are alternative planning scenarios: two GN-1130SC units or one GN-2180SC. They are separate options, rather than additions to a six-unit purchase. Every row carries its purpose so the example can be read outside this page.

Copy the rows relevant to your project into your equipment register, replace the illustrative quantity with the actual quantity, and retain separate positions for units serving different stations. Recalculate quantity times rated watts whenever the quantity changes. Keep the returned configuration reference and drawing revision alongside the row in your project file. If a model substitution is proposed, compare all fields together: changing GN-1830SC to GN-2005SC adds one pan position, 175 mm of body length and 5 W of rated power, with the same recorded voltage and frequency.

What should accompany a topping-fridge electrical specification inquiry?

Send the full model code, requested quantity, station identifiers, destination and available site supply information. Attach a counter plan showing the cabinet position, nearby equipment and intended connection location. Include the ingredient-position list so the selected electrical entry stays attached to the rail the kitchen actually needs. For separate stations, show both locations and explain which model belongs at each one.

Request the offered configuration's rated input, voltage, frequency, nameplate information, supplied connection details and installation drawing. Request measured consumption information separately if it forms part of the comparison, with the measurement conditions attached. Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司) uses the JINYU brand for this catalogue. Keep the response with the dated equipment schedule, and identify any substitution on a new row before updating the site plan. A complete reply lets purchasing compare the equipment record while the installation reviewer assesses the proposed connections against the actual premises.