Which topping fridge fits a 1500, 1800 or 2100 mm pizza prep counter?
Start with the actual rail length rather than treating the worktop length as a model size. JINYU's six SC countertop topping fridges measure 1130, 1305, 1655, 1830, 2005 and 2180 mm wide. On a hypothetical clear 1500 mm worktop, the first two leave 370 and 195 mm of gross length respectively. The 1655 mm rail is already 155 mm longer than that surface. A nominal 1500 mm counter therefore does not describe a 1500 mm SC rail.
The matrix above compares all six rails with three example worktop lengths. Positive values are simple length remainders; negative values identify an exterior outline longer than the stated worktop. Neither result includes installation spaces, the supporting base arrangement or other equipment. Measure the clear surface at the proposed location and review the selected model's installation drawing before choosing a position.
What changes when the counter is 1800 mm long?
The GN-1655SC leaves 145 mm of gross length on an 1800 mm run and provides seven 1/3 GN pan positions with 72 L listed capacity. GN-1830SC provides eight positions and 82 L, but its 1830 mm exterior is 30 mm longer than that same worktop. Do not round 1830 down to 1800 when drawing the station. Mark the complete outline and show both ends against the actual supporting surface.
A shorter option is GN-1305SC: its five positions leave 495 mm of gross length on the example counter. That difference may matter if a separate assembly board or utensil position belongs on the same run. Draw those objects to their measured sizes instead of assigning the full remainder to a work area. Keep the pan count and the assembly surface as separate decisions in the purchasing brief.
Does a 2100 mm counter accommodate the ten-pan model?
GN-2180SC is the ten-position model, with 102 L recorded capacity. Its 2180 mm exterior exceeds an example 2100 mm run by 80 mm. GN-2005SC, at nine positions and 92 L, leaves 95 mm of gross length on that run. GN-1830SC leaves 270 mm and offers eight positions. These comparisons show why pan capacity should be checked against the exact model width rather than an approximate counter category.
Compare the same ingredient list across the nine- and eight-position arrangements. Give each ingredient a position reference and identify any separately stored reserve ingredients. The published pan-position count describes the rail arrangement; it does not establish ingredient quantities used during a service or the dimensions of a separate assembly board. Ask for the offered pan arrangement and inclusions against the selected model code.
How much counter depth remains behind or in front of the rail?
All six SC models have a listed exterior depth of 405 mm and a closed height of 280 mm. For an illustrative 600 mm-deep surface, subtracting 405 from 600 leaves 195 mm of gross depth. That strip is the remainder of two exterior rectangles, before installation spaces and the real front-to-back position are considered. It is not a published working-clearance requirement or a cutting-board dimension.
Draw a side view showing the supporting surface, the rail outline and the proposed assembly area. Request the base contact locations and installation instructions for the offered configuration. Show nearby walls, shelf brackets and service connections on that drawing. Where the layout needs a board in front, measure the board and its intended placement separately; a shared counter depth alone does not establish that the whole arrangement fits.
What should I measure for the hinged lid and ingredient access?
The SC family uses a hinged lift-up lid. The listed 280 mm height describes the cabinet outline; the records used for this comparison do not give the open-lid envelope. Request a side drawing showing the lid at its operating position, then add any wall shelves or equipment above the intended location. Keep that drawing tied to the selected model rather than applying an assumed opening height to the whole family.
Also show how staff remove a pan, place utensils and replenish ingredients. Record the intended pan references and request the proposed pan depths and supplied-item list. A seven-position layout on GN-1655SC and an eight-position layout on GN-1830SC need different width outlines even though their exterior depth and closed height match. Check the complete movement beside the actual adjacent equipment.
Which electrical and temperature figures belong in the comparison?
The recorded SC supply specification is 220-240 V / 50 Hz. Rated powers progress from 130 W on GN-1130SC to 135 W on GN-1305SC, 150 W on GN-1655SC, 165 W on GN-1830SC, 170 W on GN-2005SC and 183 W on GN-2180SC. Keep the selected model and offered configuration beside those figures when requesting the connection information for the site review.
The published temperature range is 2-12 °C across these models. That equipment specification does not supply an ingredient handling plan, a required setting for a particular food or a daily energy result. Include the intended ingredient list and service arrangement in the inquiry, and request the configuration's operating and installation instructions. Use the recorded watts as rated power rather than converting them into an unsupported daily running-cost claim.
What should I send JINYU to compare the final counter layouts?
Send the measured clear worktop length and depth, a top view and a side view to Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). Identify the shortlisted SC model codes and the ingredient positions needed. Mark adjacent equipment, overhead shelves, assembly boards and the proposed rail position. Add photographs with the measurement references visible so the drawing can be related to the actual site.
Ask for the selected configuration's base drawing, open-lid envelope, installation spaces, supplied-pan details and electrical connection documents. Keep each reply attached to its model and drawing revision. The comparison matrix can narrow the shortlist by exterior length; the returned documents complete the placement review. Include the requested equipment quantity and destination in the inquiry so JINYU can respond to the same defined arrangement.
Plan pizza counter replacement pans and reserve stock: ingredient arithmetic and container schedule for four-, five- and seven-position rails.
