Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

SC hinged lids · SB glass covers

Pizza and Sushi Prep Counter Specification Download: 9 JINYU Models

Compare nine SC and SB ingredient counters: 4-10 pan positions, cabinet dimensions, lids or glass covers, capacity and electrical records in a downloadable CSV.

Download the nine-model CSV →

UTF-8 CSV · model links · blank buyer quantity and project columns

JINYU GN-1830SC countertop topping prep fridge on a service counter
JINYU GN-1830SC. The model records distinguish hinged lids from SB glass covers.

Compare nine ingredient-counter records

The table and CSV use the same published specifications. Pan positions and cover descriptions retain their source wording. Body dimensions are separate from an open-lid envelope.

Cabinet W × D × H in mm; listed capacity in L; rated power in W. Click a model for its complete record and photographs.
ModelW × D × H (mm)CapacityPan positionsCover / lidTemperatureCoolingRated powerSupply
GN-1130SC1130 × 405 × 28042 L4 x 1/3 GNHinged lift-up lid2-12 °CStatic Cooling130 W220-240V/50Hz
GN-1305SC1305 × 405 × 28052 L5 x 1/3 GNHinged lift-up lid2-12 °CStatic Cooling135 W220-240V/50Hz
GN-1655SC1655 × 405 × 28072 L7 × 1/3 GNHinged lift-up lid2-12°CStatic Cooling150 W220-240V/50Hz
GN-1830SC1830 × 405 × 28082 L8 x 1/3 GNHinged lift-up lid2-12 °CStatic Cooling165 W220-240V/50Hz
GN-2005SC2005 × 405 × 28092 L9 × 1/3 GNHinged lift-up lid2-12°CStatic Cooling170 W220-240V/50Hz
GN-2180SC2180 × 405 × 280102 L10 × 1/3 GNHinged lift-up lid2-12°CStatic Cooling183 W220-240V/50Hz
GN-1655SB1655 × 405 × 45072 L7 × 1/3 GNGlass cover2-12°CStatic Cooling150 W220-240V/50Hz
GN-1830SB1830 × 405 × 45082 L8 × 1/3 GNGlass cover2-12°CStatic Cooling165 W220-240V/50Hz
GN-2180SB2180 × 405 × 450102 L10 × 1/3 GNGlass cover2-12°CStatic Cooling183 W220-240V/50Hz

Which pizza and sushi preparation counters are in the specification sheet?

The sheet covers six JINYU SC counters with hinged lift-up lids and three SB counters with glass covers. SC widths run from 1130 to 2180 mm, with four, five, seven, eight, nine or ten recorded 1/3 GN pan positions. SB offers seven, eight or ten positions at 1655, 1830 and 2180 mm. Each row links to its model page, where the photographs and remaining specifications can be reviewed beside the comparison.

Use the CSV as the equipment section of a purchasing brief. Its final two columns are empty buyer entries for requested quantity and project line reference. Fill them after selecting a model. Keep a separate ingredient schedule showing the intended contents of each pan position. The product record describes the counter; the ingredient schedule explains how your team intends to use it.

How do the SC widths change as pan positions increase?

GN-1130SC records four positions at 1130 mm width, and GN-1305SC records five at 1305 mm. The next published SC model in this sheet is GN-1655SC, with seven positions. GN-1830SC, GN-2005SC and GN-2180SC then provide eight, nine and ten positions. All six bodies are 405 mm deep and 280 mm high. The width change from seven to eight, eight to nine, or nine to ten positions is 175 mm at each step.

For an illustrative 2400 mm counter run, a 1830 mm body leaves 570 mm of gross frontage; a 2180 mm body leaves 220 mm. Those are subtraction results for the example furniture, before installation spacing and other equipment. Mark the actual cutting or assembly surface on the plan as its own item. A wider ingredient rail changes the remaining work surface even when the recorded depth stays the same.

What changes when I select an SB glass cover instead of an SC lid?

Compare the matched 1655, 1830 and 2180 mm pairs. Each pair has the same recorded width, 405 mm depth, pan-position count and listed capacity. SC height is 280 mm; SB height is 450 mm, a 170 mm difference. At 1830 mm, both GN-1830SC and GN-1830SB list eight 1/3 GN positions, 82 L capacity and 165 W rated power. The cover arrangement and outside height still need separate attention in the layout.

On an illustrative 900 mm-high supporting counter, the listed cabinet top reaches 1180 mm for SC or 1350 mm for SB. These arithmetic heights do not describe the open-lid envelope. Ask for the relevant drawing and review access from the working side. Keep overhead shelves, customer sightlines and the proposed ingredient-loading movement on that drawing rather than relying on a closed cabinet photograph.

Does the pan-position column specify every supplied pan and accessory?

The source descriptions identify positions as 1/3 GN. The export retains that wording, including the multiplication notation used in each model record. It does not add pan depth, pan material, lids, dividers or a supplied accessory quantity. Put the intended pan list beside the chosen equipment row and request an itemised description of what accompanies that particular model. Give replacement pans and spare lids their own lines in the inquiry.

For an eight-position plan, number the active positions one through eight and assign an ingredient to each. If the operating plan also needs reserve pans, list those separately from the eight active locations. An ingredient using two adjacent positions consumes two locations in the schedule. This keeps the comparison connected to the proposed service arrangement without treating the position count as a complete bill of supplied accessories.

How should capacity and temperature be read alongside the pan schedule?

SC listed capacities are 42, 52, 72, 82, 92 and 102 L across the six widths. The matched SB models list 72, 82 and 102 L. These figures stay attached to the complete model code in the file. They do not specify the volume of a selected removable pan, a usable ingredient fill level or how much reserve stock fits elsewhere in the kitchen. Use the actual pan dimensions and operating plan for that part of the request.

Every model in this sheet records a 2-12°C range and static cooling, with the original temperature notation retained in the download. Record the ingredients and their storage requirements separately. Request the model documents relevant to the proposed application and loading pattern. A common cabinet temperature range does not establish that two different menus, ingredient arrangements or service routines have the same operating requirements.

Can I use the electrical columns to compare a proposed lineup?

The sheet keeps rated watts separate from voltage and frequency. GN-1830SC records 165 W and GN-1655SB records 150 W; one of each gives an arithmetic total of 315 W. Retain both equipment lines when passing that schedule to the person reviewing the site supply. All nine published configurations here record 220-240V/50Hz. Keep any offered electrical variation in a separate response field with its supporting documentation.

Rated power is an equipment-record value. The sum does not specify the circuit, protective device, connection arrangement or measured daily electricity use. Add the intended equipment locations and available site supply to the brief, then obtain the connection review for that actual arrangement. If a response changes the model suffix or electrical configuration, update the line before comparing its rating with the original shortlist.

What should accompany the completed CSV in a model inquiry?

Send Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司) the selected full model codes, requested quantities, project line references and destination. Attach a measured counter plan, supporting-surface height, overhead obstructions and the ingredient-position schedule. Include your requested pan depths and accessory list. Keep the product URL column so the recipient can identify the same published record you used, and retain an unchanged download beside your annotated working file.

Ask the response to identify the cabinet drawing, cover or lid arrangement, supplied items and electrical documents for each selected line. Record an alternative model on a separate row instead of overwriting the request. A proposed change from GN-2005SC to GN-2180SB changes width, height and pan positions together. Review those differences against the counter drawing and ingredient schedule before carrying the alternative into the equipment list.

Sushi counter accessory inclusion checklist: compare four SC/SB model records and request itemized pans, individual lids, supports and spares.