How do I find a topping fridge for my counter length and ingredient count?
Enter the measured length available for the cabinet, choose the minimum number of ingredient positions and select a cover arrangement if you have a preference. The selector compares nine recorded JINYU models: six SC hinged-lid rails and three SB glass-cover cabinets. It filters the exterior body length and the recorded number of 1/3 GN pan positions. Each result links to its individual specification page.
Measure the equipment position between the actual obstructions on the supporting surface. Keep neighbouring appliances and the preparation area on the same plan. The length filter compares cabinet bodies with your entered measurement; installation spacing, support design and access need the selected model drawing. Save the model codes shown in your shortlist and send that drawing with the inquiry.
Which models appear for a 1800 mm counter with at least seven positions?
Entering 1800 mm and seven positions returns GN-1655SC and GN-1655SB. Both have seven 1/3 GN positions and measure 1655 × 405 mm in plan. Their recorded capacities are 72 L and their rated powers are 150 W. The SC cabinet is 280 mm high with a hinged lid; the SB cabinet is 450 mm high with a glass cover.
The gross length balance is 1800 minus 1655 = 145 mm. An eight-position GN-1830SC or GN-1830SB is 30 mm longer than the entered space and therefore disappears from the results. That comparison explains the body-length filter. Place the seven-position cabinet on the actual counter drawing and request the additional installation and access dimensions before deciding how the remaining 145 mm is used.
What happens when I need six ingredient positions?
Choose six as the minimum and the selector includes models with seven or more positions. The recorded SC range moves from five positions on GN-1305SC to seven on GN-1655SC; this catalogue has no six-position model. SB begins at seven positions. The result uses the recorded arrangement rather than assigning a six-pan configuration to a cabinet without a corresponding model record.
List the ingredients that need separate containers, then identify which positions the service plan uses. A seven-position rail can be shortlisted for a six-ingredient brief, with the proposed allocation shown in the inquiry. Ask for the supplied-pan list and usable pan dimensions for that exact cabinet. Position count describes the equipment arrangement; it supplies neither ingredient fill quantities nor a service-output rating.
Why does a 2000 mm limit return no nine-position topping fridge?
GN-2005SC has nine positions and a body length of 2005 mm. With a maximum length of 2000 mm and a minimum of nine positions, no recorded model matches. GN-2180SC and GN-2180SB have ten positions but exceed that length too. The selector leaves the result empty so the measurement conflict stays visible in the shortlist.
At a 2005 mm limit, GN-2005SC appears because its body length equals the entered measurement. That exact match still allocates no extra length for installation requirements. Send the measured counter, adjacent equipment and required ingredient positions together when requesting a layout review. If the station arrangement changes, enter the revised measurement and keep the revised drawing beside the resulting model code.
How does the cover filter affect models with equal footprints?
At seven, eight and ten positions, the SC and SB families share lengths of 1655, 1830 and 2180 mm respectively. Their body depths are all 405 mm, and matched lengths have the same listed capacities: 72, 82 and 102 L. Selecting hinged lid shows SC only. Selecting glass cover shows SB only. Leaving the cover field at either arrangement preserves both alternatives where available.
The SB body is 170 mm taller than the corresponding SC body. This is an overall-height comparison, not an open-lid measurement. Review the staff approach, overhead fixtures and pan-removal path using the correct access drawing. Keep cover preference with the model code when requesting the quotation so an equal length does not conceal a different upper cabinet arrangement.
Which specifications should travel with the selected model?
Copy the full model code, width, depth, height, listed capacity, pan positions and rated power from the linked model page. All nine records list 220-240V/50Hz, static cooling and a 2-12°C temperature range. Preserve the full recorded temperature range in the equipment schedule and include the actual ingredients and their storage requirements in the application brief.
The selector does not change the recorded configuration. A shortlisted length and pan count still need the electrical documentation, supplied-item list and installation drawing for the offered cabinet. Send the site supply separately from the equipment rating. Rated power describes the listed electrical input, while daily energy use requires its own operating evidence. Keep those fields separate when comparing responses.
What should I send after creating a topping-fridge shortlist?
Send the selected model codes, the entered maximum length, the minimum ingredient-position count and the preferred cover arrangement. Attach a top view of the counter with measured depth and a side view showing overhead fixtures. Include container dimensions, the planned ingredient allocation, photographs of the staff approach and the project destination. Mark the revision date on the drawing.
Request the usable pan dimensions, package contents, support information and the access envelope for each shortlisted model. Add the receiving-route measurements and request packed dimensions separately from the exterior cabinet dimensions. Submit the brief through the JINYU inquiry page for Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). Retain the written response with the same model and drawing references used in the shortlist.
